finding Tekram SCSI dc395U linux patch driver:
hey, I found this driver on mandrake kernel sources, it's ac3, but I need ac14 code, also, why still not port this driver into kernel? the patch file already released 1 years ago
Hi,
Quoted 3 lines · On 15-Feb-01 Thomas Lau wrote:
hey, I found this driver on mandrake kernel sources, it's ac3, but I need ac14 code, also, why still not port this driver into kernel? the patch file already released 1 years ago
Have you checked http://www.garloff.de/kurt/linux/dc395/index.html
there ist a driver Version 1.32 (2000-12-02).
Regards
Juergen Schoew
Quoted 8 lines · Juergen Schoew
Hi,
Quoted 3 lines · On 15-Feb-01 Thomas Lau wrote:
hey, I found this driver on mandrake kernel sources, it's ac3, but I need ac14 code, also, why still not port this driver into kernel? the patch file already released 1 years ago
Have you checked http://www.garloff.de/kurt/linux/dc395/index.html
there ist a driver Version 1.32 (2000-12-02).
it's the version included with the mandrake kernel.
Signature · 2 lines
MandrakeSoft Inc http://www.chmouel.org
--ChmouelQuoted 13 lines · Chmouel Boudjnah
Quoted 8 lines · Juergen Schoew
Hi,
Quoted 3 lines · On 15-Feb-01 Thomas Lau wrote:
hey, I found this driver on mandrake kernel sources, it's ac3, but I need ac14 code, also, why still not port this driver into kernel? the patch file already released 1 years ago
Have you checked http://www.garloff.de/kurt/linux/dc395/index.html
there ist a driver Version 1.32 (2000-12-02).it's the version included with the mandrake kernel.
Quoted 8 lines
--
MandrakeSoft Inc http://www.chmouel.org
--Chmouel
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Well, I think it should add to normal kernel and do not need to patch, Thanks
also, why this driver still stick in ac3? and where can I find the new version of this patch? I think mandrake was improved that driver, Thanks
I asked Kurt why it was not submitted to the mainstream kernel. He said that some people are still experiencing problems with the card/driver and he doesn't feel it's stable enough to go in. I'm personally using it with no issues, but I'm only driving a CD-RW - not exactly stressing things.
It sounds like the people having issues need to debug the problems, or maybe it could go in under CONFIG_EXPERIMENTAL ?
Tim
Quoted 17 lines · Juergen Schoew
Hi,
Quoted 3 lines · On 15-Feb-01 Thomas Lau wrote:
hey, I found this driver on mandrake kernel sources, it's ac3, but I need ac14 code, also, why still not port this driver into kernel? the patch file already released 1 years ago
Have you checked http://www.garloff.de/kurt/linux/dc395/index.html
there ist a driver Version 1.32 (2000-12-02).Regards
Juergen Schoew
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Signature · 4 lines
Tim Wright - [email protected] or [email protected] or [email protected] IBM Linux Technology Center, Beaverton, Oregon Interested in Linux scalability ? Look at http://lse.sourceforge.net/ "Nobody ever said I was charming, they said "Rimmer, you're a git!"" RD VI
Quoted 7 lines · Thomas Lau
Quoted 6 lines · Chmouel Boudjnah
Quoted 5 lines · Juergen Schoew
Quoted 3 lines · On 15-Feb-01 Thomas Lau wrote:
hey, I found this driver on mandrake kernel sources, it's ac3, but I need ac14 code, also, why still not port this driver into kernel? the patch file already released 1 years ago
Quoted 6 lines
Quoted 4 lines
Quoted 2 lines
Have you checked http://www.garloff.de/kurt/linux/dc395/index.html
there ist a driver Version 1.32 (2000-12-02).it's the version included with the mandrake kernel.
Well, I think it should add to normal kernel and do not need to patch, Thanks
No, it shouldn't.
Drivers normally get added to the mainstream kernel if the driver is stable enough and somebody acting as maintainer requests to have it included. And, then of course, Linus / Alan / ... need to accept it.
I'm maintaining this driver, but in spite of lots of requests to add it to the mainstream kernels, I refused to do so. The reason is that some people (ca. 5%) using this driver are having serious problems, which I have not been able to track down so far. In the worst case, you can end up with data corruption. (I could reproduce and fix some of the problems, but not the data corruption one.) As that's not funny, I do not want the driver to be in the mainstream kernel.
Quoted 1 line
also, why this driver still stick in ac3?
?
Quoted 1 line
and where can I find the new version of this patch?
My version is on
http://www.garloff.de/kurt/linux/dc395/
Quoted 1 line
I think mandrake was improved that driver, Thanks
I would be both amazed and pissed off if this would be the case. Amazed because somebody was investing time to work on the driver and potentially even fix problems.
Pissed off, because I think it's very bad to fix problems and not submit the patches back to the official maintainers.
BTW, if somebody can provide a reasonable description of the chip (TRM-S1040), the chances that I'd find the bug would increase a lot ...
Regards,
Signature · 3 lines
Kurt Garloff <[email protected]> Eindhoven, NL GPG key: See mail header, key servers Linux kernel development SuSE GmbH, Nuernberg, FRG SCSI, Security
Quoted 48 lines · Kurt Garloff
Quoted 7 lines · Thomas Lau
Quoted 6 lines · Chmouel Boudjnah
Quoted 5 lines · Juergen Schoew
Quoted 3 lines · On 15-Feb-01 Thomas Lau wrote:
hey, I found this driver on mandrake kernel sources, it's ac3, but I need ac14 code, also, why still not port this driver into kernel? the patch file already released 1 years ago
Quoted 6 lines
Quoted 4 lines
Quoted 2 lines
Have you checked http://www.garloff.de/kurt/linux/dc395/index.html
there ist a driver Version 1.32 (2000-12-02).it's the version included with the mandrake kernel.
Well, I think it should add to normal kernel and do not need to patch, Thanks
No, it shouldn't.
Drivers normally get added to the mainstream kernel if the driver is stable enough and somebody acting as maintainer requests to have it included. And, then of course, Linus / Alan / ... need to accept it.I'm maintaining this driver, but in spite of lots of requests to add it to the mainstream kernels, I refused to do so. The reason is that some people (ca. 5%) using this driver are having serious problems, which I have not been able to track down so far. In the worst case, you can end up with data corruption. (I could reproduce and fix some of the problems, but not the data corruption one.) As that's not funny, I do not want the driver to be in the mainstream kernel.
Quoted 1 line
also, why this driver still stick in ac3?
?
Quoted 1 line
and where can I find the new version of this patch?
My version is on
http://www.garloff.de/kurt/linux/dc395/Quoted 1 line
I think mandrake was improved that driver, Thanks
I would be both amazed and pissed off if this would be the case. Amazed because somebody was investing time to work on the driver and potentially even fix problems.
Pissed off, because I think it's very bad to fix problems and not submit the patches back to the official maintainers.BTW, if somebody can provide a reasonable description of the chip (TRM-S1040), the chances that I'd find the bug would increase a lot ...
Quoted 8 lines
Regards,
--
Kurt Garloff <[email protected]> Eindhoven, NL
GPG key: See mail header, key servers Linux kernel development
SuSE GmbH, Nuernberg, FRG SCSI, Security------------------------------------------------------------------------
Part 1.2Type: application/pgp-signature
well, I saw the driver not updated for a few months ago, can you release a new unstable driver to people?
also, Mandrake and SuSE have a lot of expert that you can find them to help you, they have a lot of resource if you request :)
and I hope you can have a path in kernel.org, so we can get the last release of DC395 driver, Thanks a lot