Skip to contentSkip to conversation

More Build System cleanups (v2)

PATCH In review [email protected] 5 participants 26 messages Jul 2, 2009 Kbuild

lore
Share & tools
lore
#0 lore raw

cover More Build System cleanups (v2)

From: Juan Quintela <[email protected]>

Hi

This series rebase my changes on top of today git. Also add more cleanups. Anthony, feel free to cherry pick any patches that you like, if you don't want all of them.

- The bigger stuff here is move to only one qemu compilation rule for both bsd-user/darwin-user/linux-user/softmmu (the only thing that really changed was ARLIBS

- Start moving CFLAGS/LDFLAGS setup to ./configure. Just removed OS_* and ARCH_*, planing how to move the other ones.

Comments? For yesterday series, only comment was that we needed more of it :)

Later, Juan "compiling for qemu ifdef removal prize"

v1:

More cleanups, 1st two are two compile fixes for my previous series (the XEN one already sent to the list.

Generate TARGET_BASE_ARCH and TARGET_CPU on configure, and then we don't complicate Makefile.target having to regerate it.

Switch all objects that depends of one traget to obj-$(TARGET_BASE_ARCH)-y variable, that way we would be able to share Makefiles at some point.

Once there, fix kvm, xen and kqemu to not being duplicated for each arch that support i.t

Juan Quintela (19):
fix XEN Build
fix sparc not solaris build
Remove duplicated definition
use block-nested-y for files inside block/
use nwfpe-obj-y for consistence
Remove unused Makefile variable
already defined several lines before in block-obj-y configure already knows what TARGET_BASE_ARCH we need, no need to put
the logic in Makefile.target
TARGET_ARCH2 is already known at configure time and it is called
target_cpu Remove re-construction in Makefile.target
chang ifdefs by obj-
configure xen in a single place
configure kvm in a single place
configure kqemu in a single place
BASE_LDFLAGS is not used anywhere else
TARGET_ARCH == TARGET_BASE_ARCH in m68k and arm
Refactor a single rule to generate all qemu-* executables qemu binary don't exist anymore. I guess not much people is
compiling on alpha
We can wrap OS_CFLAGS/OS_LDFLAGS in CFLAGS/LDFLAGS at configure time We can wrap ARCH_CFLAGS/ARCH_LDFLAGS in CFLAGS/LDFLAGS at configure
time

 Makefile        |   26 +++---
 Makefile.hw     |    3 -
 Makefile.target |  290 ++++++++++++++++++++++---------------------------------
 configure       |  101 ++++++++-----------
 4 files changed, 170 insertions(+), 250 deletions(-)
#1 lore raw

PATCH 1/19 fix XEN Build

From: Juan Quintela <[email protected]>

I miss s/yes/y/ in one place

---
 Makefile.target |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
Makefile.target +1 -1
index a593503..5ca90af 100644
@@ -543,7 +543,7 @@ endif
 
 # xen backend driver support
 obj-$(CONFIG_XEN) += xen_machine_pv.o xen_domainbuild.o
-ifeq ($(CONFIG_XEN), yes)
+ifeq ($(CONFIG_XEN), y)
   LIBS += $(XEN_LIBS)
 endif
 
Signature · 1 line
1.6.2.2
#3 lore raw

Re: [Qemu-devel] [PATCH 01/19] fix XEN Build

Quoted 9 lines · Anthony Liguori
Quoted 5 lines · [email protected] wrote:

From: Juan Quintela <[email protected]>

I miss s/yes/y/ in one place

Is this an update to the series and if so, what's changed?

You probably missed 00/19, which has this information.

Signature · 1 line
error compiling committee.c: too many arguments to function
#5 lore raw

PATCH 2/19 fix sparc not solaris build

In reply to [email protected]

From: Juan Quintela <[email protected]>

---
 Makefile.target |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
Makefile.target +1 -1
index 5ca90af..6aeea63 100644
@@ -89,7 +89,7 @@ translate.o: CFLAGS := $(CFLAGS) $(call cc-option, $(CFLAGS), -fno-unit-at-a-tim
 endif
 
 ifeq ($(ARCH),sparc)
-  ifneq ($(CONFIG_SOLARIS),yes)
+  ifneq ($(CONFIG_SOLARIS),y)
     HELPER_CFLAGS+=-ffixed-i0
   endif
 endif
Signature · 1 line
1.6.2.2
#6 lore raw

PATCH 3/19 Remove duplicated definition

In reply to [email protected]

From: Juan Quintela <[email protected]>

---
 Makefile.target |    2 --
 1 files changed, 0 insertions(+), 2 deletions(-)
Makefile.target +0 -2
index 6aeea63..f571ff5 100644
@@ -686,8 +686,6 @@ ifdef CONFIG_SLIRP
 CPPFLAGS+=-I$(SRC_PATH)/slirp
 endif
 
-LIBS+=$(PTHREADLIBS)
-LIBS+=$(CLOCKLIBS)
 # specific flags are needed for non soft mmu emulator
 ifdef CONFIG_STATIC
 LDFLAGS+=-static
Signature · 1 line
1.6.2.2
#7 lore raw

PATCH 4/19 use block-nested-y for files inside block/

In reply to [email protected]

From: Juan Quintela <[email protected]>

---
 Makefile |   20 +++++++++++---------
 1 files changed, 11 insertions(+), 9 deletions(-)
Makefile +11 -9
index 66c28e5..99279c3 100644
@@ -67,23 +67,25 @@ recurse-all: $(SUBDIR_RULES)
 # block-obj-y is code used by both qemu system emulation and qemu-img
 
 block-obj-y = cutils.o cache-utils.o qemu-malloc.o qemu-option.o module.o
-block-obj-y += block/cow.o block/qcow.o aes.o block/vmdk.o block/cloop.o
-block-obj-y += block/dmg.o block/bochs.o block/vpc.o block/vvfat.o
-block-obj-y += block/qcow2.o block/qcow2-refcount.o block/qcow2-cluster.o
-block-obj-y += block/qcow2-snapshot.o
-block-obj-y += block/parallels.o block/nbd.o
-block-obj-y += nbd.o block.o aio.o
+block-obj-y += nbd.o block.o aio.o aes.o
+
+block-nested-y += cow.o qcow.o vmdk.o cloop.o dmg.o bochs.o vpc.o vvfat.o
+block-nested-y += qcow2.o qcow2-refcount.o qcow2-cluster.o qcow2-snapshot.o
+block-nested-y += parallels.o nbd.o
+
 
 ifdef CONFIG_WIN32
-block-obj-y += block/raw-win32.o
+block-nested-y += raw-win32.o
 else
 ifdef CONFIG_AIO
 block-obj-y += posix-aio-compat.o
 endif
-block-obj-y += block/raw-posix.o
+block-nested-y += raw-posix.o
 endif
 
-block-obj-$(CONFIG_CURL) += block/curl.o
+block-nested-$(CONFIG_CURL) += curl.o
+
+block-obj-y +=  $(addprefix block/, $(block-nested-y))
 
 ######################################################################
 # libqemu_common.a: Target independent part of system emulation. The
Signature · 1 line
1.6.2.2
#8 lore raw

PATCH 5/19 use nwfpe-obj-y for consistence

In reply to [email protected]

From: Juan Quintela <[email protected]>

---
 Makefile.target |    7 ++++---
 1 files changed, 4 insertions(+), 3 deletions(-)
Makefile.target +4 -3
index f571ff5..60754dc 100644
@@ -335,9 +335,10 @@ ifeq ($(TARGET_ARCH), i386)
 obj-y += vm86.o
 endif
 ifeq ($(TARGET_ARCH), arm)
-obj-y += nwfpe/fpa11.o nwfpe/fpa11_cpdo.o \
-nwfpe/fpa11_cpdt.o nwfpe/fpa11_cprt.o nwfpe/fpopcode.o nwfpe/single_cpdo.o \
- nwfpe/double_cpdo.o nwfpe/extended_cpdo.o arm-semi.o
+nwfpe-obj-y := fpa11.o fpa11_cpdo.o fpa11_cpdt.o fpa11_cprt.o fpopcode.o
+nwfpe-obj-y += single_cpdo.o double_cpdo.o extended_cpdo.o
+obj-y +=  $(addprefix nwfpe/, $(nwfpe-obj-y))
+obj-y += arm-semi.o
 endif
 ifeq ($(TARGET_ARCH), m68k)
 obj-y += m68k-sim.o m68k-semi.o
Signature · 1 line
1.6.2.2
#9 lore raw

PATCH 6/19 Remove unused Makefile variable

In reply to [email protected]

From: Juan Quintela <[email protected]>

---
 Makefile.target |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
Makefile.target +1 -1
index 60754dc..c33f371 100644
@@ -221,7 +221,7 @@ tcg/tcg.o: cpu.h
 
 # HELPER_CFLAGS is used for all the code compiled with static register
 # variables
-op_helper.o: CFLAGS += $(HELPER_CFLAGS) $(I386_CFLAGS)
+op_helper.o: CFLAGS += $(HELPER_CFLAGS)
 
 cpu-exec.o: CFLAGS += $(HELPER_CFLAGS)
 
Signature · 1 line
1.6.2.2
#10 lore raw

PATCH 7/19 already defined several lines before in block-obj-y

In reply to [email protected]

From: Juan Quintela <[email protected]>

---
 Makefile |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
Makefile +1 -1
index 99279c3..ddd4b16 100644
@@ -108,7 +108,7 @@ obj-y += sd.o ssi-sd.o
 obj-y += bt.o bt-host.o bt-vhci.o bt-l2cap.o bt-sdp.o bt-hci.o bt-hid.o usb-bt.o
 obj-y += bt-hci-csr.o
 obj-y += buffered_file.o migration.o migration-tcp.o net.o qemu-sockets.o
-obj-y += qemu-char.o aio.o net-checksum.o savevm.o cache-utils.o
+obj-y += qemu-char.o aio.o net-checksum.o savevm.o
 obj-y += msmouse.o ps2.o
 obj-y += qdev.o ssi.o
 
Signature · 1 line
1.6.2.2
#11 lore raw

PATCH 8/19 configure already knows what TARGET_BASE_ARCH we need, no need to put the logic in Makefile.target

In reply to [email protected]

From: Juan Quintela <[email protected]>

---
 Makefile.target |   22 ++--------------------
 configure       |    8 ++++++++
 2 files changed, 10 insertions(+), 20 deletions(-)
Makefile.target +2 -20
index c33f371..4622561 100644
@@ -1,28 +1,10 @@
 include config.mak
 include $(SRC_PATH)/rules.mak
 
+ifndef TARGET_BASE_ARCH
 TARGET_BASE_ARCH:=$(TARGET_ARCH)
-ifeq ($(TARGET_ARCH), x86_64)
-TARGET_BASE_ARCH:=i386
-endif
-ifeq ($(TARGET_ARCH), mipsn32)
-TARGET_BASE_ARCH:=mips
-endif
-ifeq ($(TARGET_ARCH), mips64)
-TARGET_BASE_ARCH:=mips
-endif
-ifeq ($(TARGET_ARCH), ppc64)
-TARGET_BASE_ARCH:=ppc
-endif
-ifeq ($(TARGET_ARCH), ppc64h)
-TARGET_BASE_ARCH:=ppc
-endif
-ifeq ($(TARGET_ARCH), ppcemb)
-TARGET_BASE_ARCH:=ppc
-endif
-ifeq ($(TARGET_ARCH), sparc64)
-TARGET_BASE_ARCH:=sparc
 endif
+
 TARGET_PATH=$(SRC_PATH)/target-$(TARGET_BASE_ARCH)
 VPATH=$(SRC_PATH):$(TARGET_PATH):$(SRC_PATH)/hw
 CPPFLAGS=-I. -I.. -I$(TARGET_PATH) -I$(SRC_PATH) -MMD -MT $@ -MP -DNEED_CPU_H
configure +8 -0
index eb9d73a..a9ce35f 100755
@@ -2000,6 +2000,7 @@ case "$target_cpu" in
   ;;
   x86_64)
     echo "TARGET_ARCH=x86_64" >> $config_mak
+    echo "TARGET_BASE_ARCH=i386" >> $config_mak
     echo "#define TARGET_ARCH \"x86_64\"" >> $config_h
     echo "#define TARGET_I386 1" >> $config_h
     echo "#define TARGET_X86_64 1" >> $config_h
@@ -2067,6 +2068,7 @@ case "$target_cpu" in
   ;;
   mipsn32|mipsn32el)
     echo "TARGET_ARCH=mipsn32" >> $config_mak
+    echo "TARGET_BASE_ARCH=mips" >> $config_mak
     echo "#define TARGET_ARCH \"mipsn32\"" >> $config_h
     echo "#define TARGET_MIPS 1" >> $config_h
     echo "#define TARGET_ABI_MIPSN32 1" >> $config_h
@@ -2074,6 +2076,7 @@ case "$target_cpu" in
   ;;
   mips64|mips64el)
     echo "TARGET_ARCH=mips64" >> $config_mak
+    echo "TARGET_BASE_ARCH=mips" >> $config_mak
     echo "#define TARGET_ARCH \"mips64\"" >> $config_h
     echo "#define TARGET_MIPS 1" >> $config_h
     echo "#define TARGET_MIPS64 1" >> $config_h
@@ -2089,6 +2092,7 @@ case "$target_cpu" in
   ;;
   ppcemb)
     echo "TARGET_ARCH=ppcemb" >> $config_mak
+    echo "TARGET_BASE_ARCH=ppc" >> $config_mak
     echo "TARGET_ABI_DIR=ppc" >> $config_mak
     echo "#define TARGET_ARCH \"ppcemb\"" >> $config_h
     echo "#define TARGET_PPC 1" >> $config_h
@@ -2103,6 +2107,7 @@ case "$target_cpu" in
   ;;
   ppc64)
     echo "TARGET_ARCH=ppc64" >> $config_mak
+    echo "TARGET_BASE_ARCH=ppc" >> $config_mak
     echo "TARGET_ABI_DIR=ppc" >> $config_mak
     echo "#define TARGET_ARCH \"ppc64\"" >> $config_h
     echo "#define TARGET_PPC 1" >> $config_h
@@ -2112,6 +2117,7 @@ case "$target_cpu" in
   ;;
   ppc64abi32)
     echo "TARGET_ARCH=ppc64" >> $config_mak
+    echo "TARGET_BASE_ARCH=ppc" >> $config_mak
     echo "TARGET_ABI_DIR=ppc" >> $config_mak
     echo "TARGET_ARCH2=ppc64abi32" >> $config_mak
     echo "#define TARGET_ARCH \"ppc64\"" >> $config_h
@@ -2137,6 +2143,7 @@ case "$target_cpu" in
   ;;
   sparc64)
     echo "TARGET_ARCH=sparc64" >> $config_mak
+    echo "TARGET_BASE_ARCH=sparc" >> $config_mak
     echo "#define TARGET_ARCH \"sparc64\"" >> $config_h
     echo "#define TARGET_SPARC 1" >> $config_h
     echo "#define TARGET_SPARC64 1" >> $config_h
@@ -2145,6 +2152,7 @@ case "$target_cpu" in
   ;;
   sparc32plus)
     echo "TARGET_ARCH=sparc64" >> $config_mak
+    echo "TARGET_BASE_ARCH=sparc" >> $config_mak
     echo "TARGET_ABI_DIR=sparc" >> $config_mak
     echo "TARGET_ARCH2=sparc32plus" >> $config_mak
     echo "#define TARGET_ARCH \"sparc64\"" >> $config_h
Signature · 1 line
1.6.2.2
#12 lore raw

PATCH 9/19 TARGET_ARCH2 is already known at configure time and it is called target_cpu Remove re-construction in Makefile.target

In reply to [email protected]

From: Juan Quintela <[email protected]>

---
 Makefile.target |   33 ++++-----------------------------
 configure       |    9 +++++++--
 2 files changed, 11 insertions(+), 31 deletions(-)
Makefile.target +4 -29
index 4622561..81d0c54 100644
@@ -11,44 +11,19 @@ CPPFLAGS=-I. -I.. -I$(TARGET_PATH) -I$(SRC_PATH) -MMD -MT $@ -MP -DNEED_CPU_H
 #CFLAGS+=-Werror
 LIBS=
 # user emulator name
-ifndef TARGET_ARCH2
-TARGET_ARCH2=$(TARGET_ARCH)
-endif
-ifeq ($(TARGET_ARCH),arm)
-  ifeq ($(TARGET_WORDS_BIGENDIAN),yes)
-    TARGET_ARCH2=armeb
-  endif
-endif
-ifeq ($(TARGET_ARCH),sh4)
-  ifeq ($(TARGET_WORDS_BIGENDIAN),yes)
-    TARGET_ARCH2=sh4eb
-  endif
-endif
-ifeq ($(TARGET_ARCH),mips)
-  ifneq ($(TARGET_WORDS_BIGENDIAN),yes)
-    TARGET_ARCH2=mipsel
-  endif
-endif
-ifeq ($(TARGET_ARCH),mipsn32)
-  ifneq ($(TARGET_WORDS_BIGENDIAN),yes)
-    TARGET_ARCH2=mipsn32el
-  endif
-endif
-ifeq ($(TARGET_ARCH),mips64)
-  ifneq ($(TARGET_WORDS_BIGENDIAN),yes)
-    TARGET_ARCH2=mips64el
-  endif
+ifndef TARGET_CPU
+TARGET_CPU=$(TARGET_ARCH)
 endif
 
 ifdef CONFIG_USER_ONLY
 # user emulator name
-QEMU_PROG=qemu-$(TARGET_ARCH2)
+QEMU_PROG=qemu-$(TARGET_CPU)
 else
 # system emulator name
 ifeq ($(TARGET_ARCH), i386)
 QEMU_PROG=qemu$(EXESUF)
 else
-QEMU_PROG=qemu-system-$(TARGET_ARCH2)$(EXESUF)
+QEMU_PROG=qemu-system-$(TARGET_CPU)$(EXESUF)
 endif
 endif
 
configure +7 -2
index a9ce35f..5b35b69 100755
@@ -2029,6 +2029,7 @@ case "$target_cpu" in
   ;;
   arm|armeb)
     echo "TARGET_ARCH=arm" >> $config_mak
+    echo "TARGET_CPU=$target_cpu" >> $config_mak
     echo "#define TARGET_ARCH \"arm\"" >> $config_h
     echo "#define TARGET_ARM 1" >> $config_h
     bflt="yes"
@@ -2061,6 +2062,7 @@ case "$target_cpu" in
   ;;
  mips|mipsel)
     echo "TARGET_ARCH=mips" >> $config_mak
+    echo "TARGET_CPU=$target_cpu" >> $config_mak
     echo "#define TARGET_ARCH \"mips\"" >> $config_h
     echo "#define TARGET_MIPS 1" >> $config_h
     echo "#define TARGET_ABI_MIPSO32 1" >> $config_h
@@ -2068,6 +2070,7 @@ case "$target_cpu" in
   ;;
   mipsn32|mipsn32el)
     echo "TARGET_ARCH=mipsn32" >> $config_mak
+    echo "TARGET_CPU=$target_cpu" >> $config_mak
     echo "TARGET_BASE_ARCH=mips" >> $config_mak
     echo "#define TARGET_ARCH \"mipsn32\"" >> $config_h
     echo "#define TARGET_MIPS 1" >> $config_h
@@ -2076,6 +2079,7 @@ case "$target_cpu" in
   ;;
   mips64|mips64el)
     echo "TARGET_ARCH=mips64" >> $config_mak
+    echo "TARGET_CPU=$target_cpu" >> $config_mak
     echo "TARGET_BASE_ARCH=mips" >> $config_mak
     echo "#define TARGET_ARCH \"mips64\"" >> $config_h
     echo "#define TARGET_MIPS 1" >> $config_h
@@ -2119,7 +2123,7 @@ case "$target_cpu" in
     echo "TARGET_ARCH=ppc64" >> $config_mak
     echo "TARGET_BASE_ARCH=ppc" >> $config_mak
     echo "TARGET_ABI_DIR=ppc" >> $config_mak
-    echo "TARGET_ARCH2=ppc64abi32" >> $config_mak
+    echo "TARGET_CPU=ppc64abi32" >> $config_mak
     echo "#define TARGET_ARCH \"ppc64\"" >> $config_h
     echo "#define TARGET_PPC 1" >> $config_h
     echo "#define TARGET_PPC64 1" >> $config_h
@@ -2129,6 +2133,7 @@ case "$target_cpu" in
   ;;
   sh4|sh4eb)
     echo "TARGET_ARCH=sh4" >> $config_mak
+    echo "TARGET_CPU=$target_cpu" >> $config_mak
     echo "#define TARGET_ARCH \"sh4\"" >> $config_h
     echo "#define TARGET_SH4 1" >> $config_h
     bflt="yes"
@@ -2154,7 +2159,7 @@ case "$target_cpu" in
     echo "TARGET_ARCH=sparc64" >> $config_mak
     echo "TARGET_BASE_ARCH=sparc" >> $config_mak
     echo "TARGET_ABI_DIR=sparc" >> $config_mak
-    echo "TARGET_ARCH2=sparc32plus" >> $config_mak
+    echo "TARGET_CPU=sparc32plus" >> $config_mak
     echo "#define TARGET_ARCH \"sparc64\"" >> $config_h
     echo "#define TARGET_SPARC 1" >> $config_h
     echo "#define TARGET_SPARC64 1" >> $config_h
Signature · 1 line
1.6.2.2
#13 lore raw

PATCH 10/19 chang ifdefs by obj-

In reply to [email protected]

From: Juan Quintela <[email protected]>

---
 Makefile.target |  181 ++++++++++++++++++++++++++++---------------------------
 1 files changed, 93 insertions(+), 88 deletions(-)
Makefile.target +93 -88
index 81d0c54..cfb0bab 100644
@@ -518,122 +518,127 @@ obj-y += e1000.o
 # Generic watchdog support and some watchdog devices
 obj-y += wdt_ib700.o wdt_i6300esb.o
 
-ifeq ($(TARGET_BASE_ARCH), i386)
 # Hardware support
-obj-y += ide.o pckbd.o vga.o $(sound-obj-y) dma.o
-obj-y += fdc.o mc146818rtc.o serial.o i8259.o i8254.o pcspk.o pc.o
-obj-y += cirrus_vga.o apic.o ioapic.o parallel.o acpi.o piix_pci.o
-obj-y += usb-uhci.o vmmouse.o vmport.o vmware_vga.o hpet.o
-obj-y += device-hotplug.o pci-hotplug.o smbios.o
+obj-i386-y = ide.o pckbd.o vga.o $(sound-obj-y) dma.o
+obj-i386-y += fdc.o mc146818rtc.o serial.o i8259.o i8254.o pcspk.o pc.o
+obj-i386-y += cirrus_vga.o apic.o ioapic.o parallel.o acpi.o piix_pci.o
+obj-i386-y += usb-uhci.o vmmouse.o vmport.o vmware_vga.o hpet.o
+obj-i386-y += device-hotplug.o pci-hotplug.o smbios.o
+
+ifeq ($(TARGET_BASE_ARCH), i386)
 CPPFLAGS += -DHAS_AUDIO -DHAS_AUDIO_CHOICE
 endif
-ifeq ($(TARGET_BASE_ARCH), ppc)
-CPPFLAGS += -DHAS_AUDIO -DHAS_AUDIO_CHOICE
+
 # shared objects
-obj-y += ppc.o ide.o vga.o $(sound-obj-y) dma.o openpic.o
+obj-ppc-y = ppc.o ide.o vga.o $(sound-obj-y) dma.o openpic.o
 # PREP target
-obj-y += pckbd.o serial.o i8259.o i8254.o fdc.o mc146818rtc.o
-obj-y += prep_pci.o ppc_prep.o
+obj-ppc-y += pckbd.o serial.o i8259.o i8254.o fdc.o mc146818rtc.o
+obj-ppc-y += prep_pci.o ppc_prep.o
 # Mac shared devices
-obj-y += macio.o cuda.o adb.o mac_nvram.o mac_dbdma.o
+obj-ppc-y += macio.o cuda.o adb.o mac_nvram.o mac_dbdma.o
 # OldWorld PowerMac
-obj-y += heathrow_pic.o grackle_pci.o ppc_oldworld.o
+obj-ppc-y += heathrow_pic.o grackle_pci.o ppc_oldworld.o
 # NewWorld PowerMac
-obj-y += unin_pci.o ppc_newworld.o
+obj-ppc-y += unin_pci.o ppc_newworld.o
 # PowerPC 4xx boards
-obj-y += pflash_cfi02.o ppc4xx_devs.o ppc4xx_pci.o ppc405_uc.o ppc405_boards.o
-obj-y += ppc440.o ppc440_bamboo.o
+obj-ppc-y += pflash_cfi02.o ppc4xx_devs.o ppc4xx_pci.o ppc405_uc.o ppc405_boards.o
+obj-ppc-y += ppc440.o ppc440_bamboo.o
 # PowerPC E500 boards
-obj-y += ppce500_pci.o ppce500_mpc8544ds.o
+obj-ppc-y += ppce500_pci.o ppce500_mpc8544ds.o
+obj-ppc-$(CONFIG_KVM) += kvm_ppc.o
+
+ifeq ($(TARGET_BASE_ARCH), ppc)
+CPPFLAGS += -DHAS_AUDIO -DHAS_AUDIO_CHOICE
+endif
+
 ifdef FDT_LIBS
-obj-y += device_tree.o
+obj-ppc-y += device_tree.o
 LIBS+= $(FDT_LIBS)
 endif
-obj-$(CONFIG_KVM) += kvm_ppc.o
-endif
+
+obj-mips-y = mips_r4k.o mips_jazz.o mips_malta.o mips_mipssim.o
+obj-mips-y += mips_timer.o mips_int.o dma.o vga.o serial.o i8254.o i8259.o rc4030.o
+obj-mips-y += g364fb.o jazz_led.o dp8393x.o
+obj-mips-y += ide.o gt64xxx.o pckbd.o fdc.o mc146818rtc.o usb-uhci.o acpi.o ds1225y.o
+obj-mips-y += piix_pci.o parallel.o cirrus_vga.o pcspk.o $(sound-obj-y)
+obj-mips-y += mipsnet.o
+obj-mips-y += pflash_cfi01.o
+obj-mips-y += vmware_vga.o
+
 ifeq ($(TARGET_BASE_ARCH), mips)
-obj-y += mips_r4k.o mips_jazz.o mips_malta.o mips_mipssim.o
-obj-y += mips_timer.o mips_int.o dma.o vga.o serial.o i8254.o i8259.o rc4030.o
-obj-y += g364fb.o jazz_led.o dp8393x.o
-obj-y += ide.o gt64xxx.o pckbd.o fdc.o mc146818rtc.o usb-uhci.o acpi.o ds1225y.o
-obj-y += piix_pci.o parallel.o cirrus_vga.o pcspk.o $(sound-obj-y)
-obj-y += mipsnet.o
-obj-y += pflash_cfi01.o
-obj-y += vmware_vga.o
 CPPFLAGS += -DHAS_AUDIO -DHAS_AUDIO_CHOICE
 endif
-ifeq ($(TARGET_BASE_ARCH), microblaze)
-obj-y += petalogix_s3adsp1800_mmu.o
 
-obj-y += microblaze_pic_cpu.o
-obj-y += xilinx_intc.o
-obj-y += xilinx_timer.o
-obj-y += xilinx_uartlite.o
-obj-y += xilinx_ethlite.o
+obj-microblaze-y = petalogix_s3adsp1800_mmu.o
+
+obj-microblaze-y += microblaze_pic_cpu.o
+obj-microblaze-y += xilinx_intc.o
+obj-microblaze-y += xilinx_timer.o
+obj-microblaze-y += xilinx_uartlite.o
+obj-microblaze-y += xilinx_ethlite.o
+
+obj-microblaze-y += pflash_cfi02.o
 
-obj-y += pflash_cfi02.o
 ifdef FDT_LIBS
-obj-y += device_tree.o
+obj-microblaze-y += device_tree.o
 LIBS+= $(FDT_LIBS)
 endif
-endif
-ifeq ($(TARGET_BASE_ARCH), cris)
+
 # Boards
-obj-y += cris_pic_cpu.o etraxfs.o axis_dev88.o
+obj-cris-y = cris_pic_cpu.o etraxfs.o axis_dev88.o
 
 # IO blocks
-obj-y += etraxfs_dma.o
-obj-y += etraxfs_pic.o
-obj-y += etraxfs_eth.o
-obj-y += etraxfs_timer.o
-obj-y += etraxfs_ser.o
+obj-cris-y += etraxfs_dma.o
+obj-cris-y += etraxfs_pic.o
+obj-cris-y += etraxfs_eth.o
+obj-cris-y += etraxfs_timer.o
+obj-cris-y += etraxfs_ser.o
+
+obj-cris-y += pflash_cfi02.o
 
-obj-y += pflash_cfi02.o
-endif
-ifeq ($(TARGET_BASE_ARCH), sparc)
 ifeq ($(TARGET_ARCH), sparc64)
-obj-y += sun4u.o ide.o pckbd.o vga.o apb_pci.o
-obj-y += fdc.o mc146818rtc.o serial.o
-obj-y += cirrus_vga.o parallel.o
+obj-sparc-y = sun4u.o ide.o pckbd.o vga.o apb_pci.o
+obj-sparc-y += fdc.o mc146818rtc.o serial.o
+obj-sparc-y += cirrus_vga.o parallel.o
 else
-obj-y += sun4m.o tcx.o iommu.o slavio_intctl.o
-obj-y += slavio_timer.o slavio_misc.o fdc.o sparc32_dma.o
-obj-y += cs4231.o eccmemctl.o sbi.o sun4c_intctl.o
-endif
-endif
+obj-sparc-y = sun4m.o tcx.o iommu.o slavio_intctl.o
+obj-sparc-y += slavio_timer.o slavio_misc.o fdc.o sparc32_dma.o
+obj-sparc-y += cs4231.o eccmemctl.o sbi.o sun4c_intctl.o
+endif
+
+obj-arm-y = integratorcp.o versatilepb.o smc91c111.o arm_pic.o arm_timer.o
+obj-arm-y += arm_boot.o pl011.o pl031.o pl050.o pl080.o pl110.o pl181.o pl190.o
+obj-arm-y += versatile_pci.o
+obj-arm-y += realview_gic.o realview.o arm_sysctl.o mpcore.o
+obj-arm-y += armv7m.o armv7m_nvic.o stellaris.o pl022.o stellaris_enet.o
+obj-arm-y += pl061.o
+obj-arm-y += arm-semi.o
+obj-arm-y += pxa2xx.o pxa2xx_pic.o pxa2xx_gpio.o pxa2xx_timer.o pxa2xx_dma.o
+obj-arm-y += pxa2xx_lcd.o pxa2xx_mmci.o pxa2xx_pcmcia.o pxa2xx_keypad.o
+obj-arm-y += pflash_cfi01.o gumstix.o
+obj-arm-y += zaurus.o ide.o serial.o spitz.o tosa.o tc6393xb.o
+obj-arm-y += omap1.o omap_lcdc.o omap_dma.o omap_clk.o omap_mmc.o omap_i2c.o
+obj-arm-y += omap2.o omap_dss.o soc_dma.o
+obj-arm-y += omap_sx1.o palm.o tsc210x.o
+obj-arm-y += nseries.o blizzard.o onenand.o vga.o cbus.o tusb6010.o usb-musb.o
+obj-arm-y += mst_fpga.o mainstone.o
+obj-arm-y += musicpal.o pflash_cfi02.o
+obj-arm-y += framebuffer.o
+obj-arm-y += syborg.o syborg_fb.o syborg_interrupt.o syborg_keyboard.o
+obj-arm-y += syborg_serial.o syborg_timer.o syborg_pointer.o syborg_rtc.o
+obj-arm-y += syborg_virtio.o
+
 ifeq ($(TARGET_BASE_ARCH), arm)
-obj-y += integratorcp.o versatilepb.o smc91c111.o arm_pic.o arm_timer.o
-obj-y += arm_boot.o pl011.o pl031.o pl050.o pl080.o pl110.o pl181.o pl190.o
-obj-y += versatile_pci.o
-obj-y += realview_gic.o realview.o arm_sysctl.o mpcore.o
-obj-y += armv7m.o armv7m_nvic.o stellaris.o pl022.o stellaris_enet.o
-obj-y += pl061.o
-obj-y += arm-semi.o
-obj-y += pxa2xx.o pxa2xx_pic.o pxa2xx_gpio.o pxa2xx_timer.o pxa2xx_dma.o
-obj-y += pxa2xx_lcd.o pxa2xx_mmci.o pxa2xx_pcmcia.o pxa2xx_keypad.o
-obj-y += pflash_cfi01.o gumstix.o
-obj-y += zaurus.o ide.o serial.o spitz.o tosa.o tc6393xb.o
-obj-y += omap1.o omap_lcdc.o omap_dma.o omap_clk.o omap_mmc.o omap_i2c.o
-obj-y += omap2.o omap_dss.o soc_dma.o
-obj-y += omap_sx1.o palm.o tsc210x.o
-obj-y += nseries.o blizzard.o onenand.o vga.o cbus.o tusb6010.o usb-musb.o
-obj-y += mst_fpga.o mainstone.o
-obj-y += musicpal.o pflash_cfi02.o
-obj-y += framebuffer.o
-obj-y += syborg.o syborg_fb.o syborg_interrupt.o syborg_keyboard.o
-obj-y += syborg_serial.o syborg_timer.o syborg_pointer.o syborg_rtc.o
-obj-y += syborg_virtio.o
 CPPFLAGS += -DHAS_AUDIO
 endif
-ifeq ($(TARGET_BASE_ARCH), sh4)
-obj-y += shix.o r2d.o sh7750.o sh7750_regnames.o tc58128.o
-obj-y += sh_timer.o sh_serial.o sh_intc.o sh_pci.o sm501.o serial.o
-obj-y += ide.o
-endif
-ifeq ($(TARGET_BASE_ARCH), m68k)
-obj-y += an5206.o mcf5206.o mcf_uart.o mcf_intc.o mcf5208.o mcf_fec.o
-obj-y += m68k-semi.o dummy_m68k.o
-endif
+
+obj-sh4-y = shix.o r2d.o sh7750.o sh7750_regnames.o tc58128.o
+obj-sh4-y += sh_timer.o sh_serial.o sh_intc.o sh_pci.o sm501.o serial.o
+obj-sh4-y += ide.o
+
+obj-m68k-y = an5206.o mcf5206.o mcf_uart.o mcf_intc.o mcf5208.o mcf_fec.o
+obj-m68k-y += m68k-semi.o dummy_m68k.o
+
 ifdef CONFIG_COCOA
 COCOA_LIBS=-F/System/Library/Frameworks -framework Cocoa -framework IOKit
 ifdef CONFIG_COREAUDIO
@@ -684,8 +689,8 @@ monitor.o: qemu-monitor.h
 
 $(QEMU_PROG): LIBS += $(SDL_LIBS) $(COCOA_LIBS) $(CURSES_LIBS) $(BRLAPI_LIBS) $(VDE_LIBS) $(CURL_LIBS)
 $(QEMU_PROG): ARLIBS=../libqemu_common.a libqemu.a $(HWLIB)
-$(QEMU_PROG): $(obj-y) ../libqemu_common.a libqemu.a $(HWLIB)
-	$(call LINK,$(obj-y))
+$(QEMU_PROG): $(obj-y) $(obj-$(TARGET_BASE_ARCH)-y) ../libqemu_common.a libqemu.a $(HWLIB)
+	$(call LINK,$(obj-y) $(obj-$(TARGET_BASE_ARCH)-y))
 
 endif # !CONFIG_USER_ONLY
 
Signature · 1 line
1.6.2.2
#14 lore raw

PATCH 11/19 configure xen in a single place

In reply to [email protected]

From: Juan Quintela <[email protected]>

---
 configure |   17 +++++++----------
 1 files changed, 7 insertions(+), 10 deletions(-)
configure +7 -10
index 5b35b69..56e4d38 100755
@@ -1991,11 +1991,6 @@ case "$target_cpu" in
       echo "KVM_CFLAGS=$kvm_cflags" >> $config_mak
       echo "#define CONFIG_KVM 1" >> $config_h
     fi
-    if test "$xen" = "yes" -a "$target_softmmu" = "yes";
-    then
-      echo "CONFIG_XEN=y" >> $config_mak
-      echo "#define CONFIG_XEN 1" >> $config_h
-    fi
     target_phys_bits=32
   ;;
   x86_64)
@@ -2014,11 +2009,6 @@ case "$target_cpu" in
       echo "KVM_CFLAGS=$kvm_cflags" >> $config_mak
       echo "#define CONFIG_KVM 1" >> $config_h
     fi
-    if test "$xen" = "yes" -a "$target_softmmu" = "yes"
-    then
-      echo "CONFIG_XEN=y" >> $config_mak
-      echo "#define CONFIG_XEN 1" >> $config_h
-    fi
     target_phys_bits=64
   ;;
   alpha)
@@ -2174,6 +2164,13 @@ esac
 if [ $target_phys_bits -lt $hostlongbits ] ; then
   target_phys_bits=$hostlongbits
 fi
+case "$target_cpu" in
+  i386|x86_64)
+    if test "$xen" = "yes" -a "$target_softmmu" = "yes" ; then
+      echo "CONFIG_XEN=y" >> $config_mak
+      echo "#define CONFIG_XEN 1" >> $config_h
+    fi
+esac
 echo "HWLIB=../libhw$target_phys_bits/libqemuhw$target_phys_bits.a" >> $config_mak
 echo "#define TARGET_PHYS_ADDR_BITS $target_phys_bits" >> $config_h
 echo "subdir-$target: subdir-libhw$target_phys_bits" >> $config_host_mak
Signature · 1 line
1.6.2.2
#15 lore raw

Re: [Qemu-devel] [PATCH 11/19] configure xen in a single place

Quoted 37 lines · On Thursday 02 July 2009 16:46:35 [email protected] wrote:

From: Juan Quintela <[email protected]>

---
 configure |   17 +++++++----------
 1 files changed, 7 insertions(+), 10 deletions(-)
configure +0 -10
index 5b35b69..56e4d38 100755
@@ -1991,11 +1991,6 @@ case "$target_cpu" in
       echo "KVM_CFLAGS=$kvm_cflags" >> $config_mak
       echo "#define CONFIG_KVM 1" >> $config_h
     fi
-    if test "$xen" = "yes" -a "$target_softmmu" = "yes";
-    then
-      echo "CONFIG_XEN=y" >> $config_mak
-      echo "#define CONFIG_XEN 1" >> $config_h
-    fi
     target_phys_bits=32
   ;;
   x86_64)
@@ -2014,11 +2009,6 @@ case "$target_cpu" in
       echo "KVM_CFLAGS=$kvm_cflags" >> $config_mak
       echo "#define CONFIG_KVM 1" >> $config_h
     fi
-    if test "$xen" = "yes" -a "$target_softmmu" = "yes"
-    then
-      echo "CONFIG_XEN=y" >> $config_mak
-      echo "#define CONFIG_XEN 1" >> $config_h
-    fi
     target_phys_bits=64
   ;;
   alpha)

configure esac · line 2168

Quoted 5 lines
configure +2 -0
@@ -2174,6 +2164,13 @@ esac
 if [ $target_phys_bits -lt $hostlongbits ] ; then
   target_phys_bits=$hostlongbits
 fi
+case "$target_cpu" in
+  i386|x86_64)

If 'target_cpu' is set by 'uname -m' then this has to be

+ i386|x86_64|amd64)

or you will break *BSD, otherwise.

Quoted 9 lines
configure +5 -0
+    if test "$xen" = "yes" -a "$target_softmmu" = "yes" ; then
+      echo "CONFIG_XEN=y" >> $config_mak
+      echo "#define CONFIG_XEN 1" >> $config_h
+    fi
+esac
 echo "HWLIB=../libhw$target_phys_bits/libqemuhw$target_phys_bits.a" >>

$config_mak echo "#define TARGET_PHYS_ADDR_BITS $target_phys_bits" >> $config_h echo "subdir-$target: subdir-libhw$target_phys_bits" >> $config_host_mak

Signature · 6 lines
---to satisfy European Law for business letters:
Advanced Micro Devices GmbH
Karl-Hammerschmidt-Str. 34, 85609 Dornach b. Muenchen
Geschaeftsfuehrer: Thomas M. McCoy, Giuliano Meroni
Sitz: Dornach, Gemeinde Aschheim, Landkreis Muenchen
Registergericht Muenchen, HRB Nr. 43632
#16 lore raw

Re: [Qemu-devel] [PATCH 11/19] configure xen in a single place

Quoted 3 lines
Quoted 1 line

+ i386|x86_64)

If 'target_cpu' is set by 'uname -m' then this has to be

It obviously isn't.

Paul

#17 lore raw

[Qemu-devel] Re: [PATCH 11/19] configure xen in a single place

In reply to Christoph Egger
Quoted 6 lines · Christoph Egger

If 'target_cpu' is set by 'uname -m' then this has to be

+ i386|x86_64|amd64)

or you will break *BSD, otherwise.

configure has this bit previously.

case "$cpu" in
i386|i486|i586|i686|i86pc|BePC)

    cpu="i386"
  ;;
  x86_64|amd64)
    cpu="x86_64"

Later, Juan.

#18 lore raw

PATCH 12/19 configure kvm in a single place

In reply to [email protected]

From: Juan Quintela <[email protected]>

---
 configure |   41 +++++++++++++----------------------------
 1 files changed, 13 insertions(+), 28 deletions(-)
configure +13 -28
index 56e4d38..1fe01af 100755
@@ -1962,19 +1962,6 @@ target_nptl="no"
 interp_prefix1=`echo "$interp_prefix" | sed "s/%M/$target_cpu/g"`
 echo "#define CONFIG_QEMU_PREFIX \"$interp_prefix1\"" >> $config_h
 gdb_xml_files=""
-target_kvm="$kvm"
-
-# Make sure the target and host cpus are compatible
-if test ! \( "$target_cpu" = "$cpu" -o \
-  \( "$target_cpu" = "ppcemb" -a "$cpu" = "ppc" \) -o \
-  \( "$target_cpu" = "x86_64" -a "$cpu" = "i386"   \) -o \
-  \( "$target_cpu" = "i386"   -a "$cpu" = "x86_64" \) \) ; then
-  target_kvm="no"
-fi
-# Disable KVM for linux-user
-if test "$target_softmmu" = "no" ; then
-  target_kvm="no"
-fi
 
 case "$target_cpu" in
   i386)
@@ -1986,11 +1973,6 @@ case "$target_cpu" in
       echo "CONFIG_KQEMU=y" >> $config_mak
       echo "#define CONFIG_KQEMU 1" >> $config_h
     fi
-    if test "$target_kvm" = "yes" ; then
-      echo "CONFIG_KVM=y" >> $config_mak
-      echo "KVM_CFLAGS=$kvm_cflags" >> $config_mak
-      echo "#define CONFIG_KVM 1" >> $config_h
-    fi
     target_phys_bits=32
   ;;
   x86_64)
@@ -2004,11 +1986,6 @@ case "$target_cpu" in
       echo "CONFIG_KQEMU=y" >> $config_mak
       echo "#define CONFIG_KQEMU 1" >> $config_h
     fi
-    if test "$target_kvm" = "yes" ; then
-      echo "CONFIG_KVM=y" >> $config_mak
-      echo "KVM_CFLAGS=$kvm_cflags" >> $config_mak
-      echo "#define CONFIG_KVM 1" >> $config_h
-    fi
     target_phys_bits=64
   ;;
   alpha)
@@ -2091,11 +2068,6 @@ case "$target_cpu" in
     echo "#define TARGET_ARCH \"ppcemb\"" >> $config_h
     echo "#define TARGET_PPC 1" >> $config_h
     echo "#define TARGET_PPCEMB 1" >> $config_h
-    if test "$target_kvm" = "yes" ; then
-      echo "CONFIG_KVM=y" >> $config_mak
-      echo "KVM_CFLAGS=$kvm_cflags" >> $config_mak
-      echo "#define CONFIG_KVM 1" >> $config_h
-    fi
     gdb_xml_files="power-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
     target_phys_bits=64
   ;;
@@ -2171,6 +2143,19 @@ case "$target_cpu" in
       echo "#define CONFIG_XEN 1" >> $config_h
     fi
 esac
+case "$target_cpu" in
+  i386|x86_64|ppcemb)
+    # Make sure the target and host cpus are compatible
+    if test "$kvm" = "yes" -a "$target_softmmu" = "yes" -a \
+      \( "$target_cpu" = "$cpu" -o \
+      \( "$target_cpu" = "ppcemb" -a "$cpu" = "ppc" \) -o \
+      \( "$target_cpu" = "x86_64" -a "$cpu" = "i386"   \) -o \
+      \( "$target_cpu" = "i386"   -a "$cpu" = "x86_64" \) \) ; then
+      echo "CONFIG_KVM=y" >> $config_mak
+      echo "KVM_CFLAGS=$kvm_cflags" >> $config_mak
+      echo "#define CONFIG_KVM 1" >> $config_h
+    fi
+esac
 echo "HWLIB=../libhw$target_phys_bits/libqemuhw$target_phys_bits.a" >> $config_mak
 echo "#define TARGET_PHYS_ADDR_BITS $target_phys_bits" >> $config_h
 echo "subdir-$target: subdir-libhw$target_phys_bits" >> $config_host_mak
Signature · 1 line
1.6.2.2
#19 lore raw

PATCH 13/19 configure kqemu in a single place

In reply to [email protected]

From: Juan Quintela <[email protected]>

---
 configure |   15 +++++----------
 1 files changed, 5 insertions(+), 10 deletions(-)
configure +5 -10
index 1fe01af..29dcee6 100755
@@ -1968,11 +1968,6 @@ case "$target_cpu" in
     echo "TARGET_ARCH=i386" >> $config_mak
     echo "#define TARGET_ARCH \"i386\"" >> $config_h
     echo "#define TARGET_I386 1" >> $config_h
-    if test $kqemu = "yes" -a "$target_softmmu" = "yes"
-    then
-      echo "CONFIG_KQEMU=y" >> $config_mak
-      echo "#define CONFIG_KQEMU 1" >> $config_h
-    fi
     target_phys_bits=32
   ;;
   x86_64)
@@ -1981,11 +1976,6 @@ case "$target_cpu" in
     echo "#define TARGET_ARCH \"x86_64\"" >> $config_h
     echo "#define TARGET_I386 1" >> $config_h
     echo "#define TARGET_X86_64 1" >> $config_h
-    if test $kqemu = "yes" -a "$target_softmmu" = "yes" -a $cpu = "x86_64"
-    then
-      echo "CONFIG_KQEMU=y" >> $config_mak
-      echo "#define CONFIG_KQEMU 1" >> $config_h
-    fi
     target_phys_bits=64
   ;;
   alpha)
@@ -2142,6 +2132,11 @@ case "$target_cpu" in
       echo "CONFIG_XEN=y" >> $config_mak
       echo "#define CONFIG_XEN 1" >> $config_h
     fi
+    if test $kqemu = "yes" -a "$target_softmmu" = "yes"
+    then
+      echo "CONFIG_KQEMU=y" >> $config_mak
+      echo "#define CONFIG_KQEMU 1" >> $config_h
+    fi
 esac
 case "$target_cpu" in
   i386|x86_64|ppcemb)
Signature · 1 line
1.6.2.2
#20 lore raw

PATCH 14/19 BASE_LDFLAGS is not used anywhere else

In reply to [email protected]

From: Juan Quintela <[email protected]>

---
 Makefile.target |    4 ----
 1 files changed, 0 insertions(+), 4 deletions(-)
Makefile.target +0 -4
index cfb0bab..7dc7a0b 100644
@@ -56,10 +56,6 @@ ifeq ($(ARCH),alpha)
 CFLAGS+=-msmall-data
 endif
 
-ifeq ($(ARCH),hppa)
-BASE_LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
-endif
-
 ifeq ($(ARCH),ia64)
 CFLAGS+=-mno-sdata
 endif
Signature · 1 line
1.6.2.2
#21 lore raw

PATCH 15/19 TARGET_ARCH == TARGET_BASE_ARCH in m68k and arm

In reply to [email protected]

From: Juan Quintela <[email protected]>

---
 Makefile.target |   17 ++++++++---------
 1 files changed, 8 insertions(+), 9 deletions(-)
Makefile.target +8 -9
index 7dc7a0b..33f817d 100644
@@ -287,23 +287,22 @@ obj-$(TARGET_HAS_ELFLOAD32) += elfload32.o
 ifeq ($(TARGET_ARCH), i386)
 obj-y += vm86.o
 endif
-ifeq ($(TARGET_ARCH), arm)
+
 nwfpe-obj-y := fpa11.o fpa11_cpdo.o fpa11_cpdt.o fpa11_cprt.o fpopcode.o
 nwfpe-obj-y += single_cpdo.o double_cpdo.o extended_cpdo.o
-obj-y +=  $(addprefix nwfpe/, $(nwfpe-obj-y))
-obj-y += arm-semi.o
-endif
-ifeq ($(TARGET_ARCH), m68k)
-obj-y += m68k-sim.o m68k-semi.o
-endif
+obj-arm-y +=  $(addprefix nwfpe/, $(nwfpe-obj-y))
+obj-arm-y += arm-semi.o
+
+obj-m68k-y += m68k-sim.o m68k-semi.o
 
 # Note: this is a workaround. The real fix is to avoid compiling
 # cpu_signal_handler() in cpu-exec.c.
 signal.o: CFLAGS += $(HELPER_CFLAGS)
 
 $(QEMU_PROG): ARLIBS=../libqemu_user.a libqemu.a
-$(QEMU_PROG): $(obj-y) ../libqemu_user.a libqemu.a
-	$(call LINK,$(obj-y))
+$(QEMU_PROG): $(obj-y) $(obj-$(TARGET_BASE_ARCH)-y)  ../libqemu_user.a libqemu.a
+	$(call LINK,$(obj-y) $(obj-$(TARGET_BASE_ARCH)-y))
+
 ifeq ($(ARCH),alpha)
 # Mark as 32 bit binary, i. e. it will be mapped into the low 31 bit of
 # the address space (31 bit so sign extending doesn't matter)
Signature · 1 line
1.6.2.2
#22 lore raw

PATCH 16/19 Refactor a single rule to generate all qemu-* executables

In reply to [email protected]

From: Juan Quintela <[email protected]>

---
 Makefile.target |   22 +++++++++-------------
 1 files changed, 9 insertions(+), 13 deletions(-)
Makefile.target +9 -13
index 33f817d..6a701ae 100644
@@ -299,9 +299,7 @@ obj-m68k-y += m68k-sim.o m68k-semi.o
 # cpu_signal_handler() in cpu-exec.c.
 signal.o: CFLAGS += $(HELPER_CFLAGS)
 
-$(QEMU_PROG): ARLIBS=../libqemu_user.a libqemu.a
-$(QEMU_PROG): $(obj-y) $(obj-$(TARGET_BASE_ARCH)-y)  ../libqemu_user.a libqemu.a
-	$(call LINK,$(obj-y) $(obj-$(TARGET_BASE_ARCH)-y))
+ARLIBS=../libqemu_user.a libqemu.a
 
 ifeq ($(ARCH),alpha)
 # Mark as 32 bit binary, i. e. it will be mapped into the low 31 bit of
@@ -331,9 +329,7 @@ obj-y = main.o commpage.o machload.o mmap.o signal.o syscall.o thunk.o \
 # cpu_signal_handler() in cpu-exec.c.
 signal.o: CFLAGS += $(HELPER_CFLAGS)
 
-$(QEMU_PROG): ARLIBS=libqemu.a
-$(QEMU_PROG): $(obj-y) libqemu.a
-	$(call LINK,$(obj-y))
+ARLIBS=libqemu.a
 
 endif #CONFIG_DARWIN_USER
 
@@ -431,9 +427,7 @@ obj-y += uaccess.o
 # cpu_signal_handler() in cpu-exec.c.
 signal.o: CFLAGS += $(HELPER_CFLAGS)
 
-$(QEMU_PROG): ARLIBS=libqemu.a ../libqemu_user.a
-$(QEMU_PROG): $(obj-y) libqemu.a ../libqemu_user.a
-	$(call LINK,$(obj-y))
+ARLIBS=libqemu.a ../libqemu_user.a
 
 endif #CONFIG_BSD_USER
 
@@ -682,13 +676,15 @@ vl.o: qemu-options.h
 
 monitor.o: qemu-monitor.h
 
-$(QEMU_PROG): LIBS += $(SDL_LIBS) $(COCOA_LIBS) $(CURSES_LIBS) $(BRLAPI_LIBS) $(VDE_LIBS) $(CURL_LIBS)
-$(QEMU_PROG): ARLIBS=../libqemu_common.a libqemu.a $(HWLIB)
-$(QEMU_PROG): $(obj-y) $(obj-$(TARGET_BASE_ARCH)-y) ../libqemu_common.a libqemu.a $(HWLIB)
-	$(call LINK,$(obj-y) $(obj-$(TARGET_BASE_ARCH)-y))
+LIBS += $(SDL_LIBS) $(COCOA_LIBS) $(CURSES_LIBS) $(BRLAPI_LIBS) $(VDE_LIBS) $(CURL_LIBS)
+ARLIBS=../libqemu_common.a libqemu.a $(HWLIB)
 
 endif # !CONFIG_USER_ONLY
 
+$(QEMU_PROG): $(obj-y) $(obj-$(TARGET_BASE_ARCH)-y) $(ARLIBS)
+	$(call LINK,$(obj-y) $(obj-$(TARGET_BASE_ARCH)-y))
+
+
 gdbstub-xml.c: $(TARGET_XML_FILES) feature_to_c.sh
 ifeq ($(TARGET_XML_FILES),)
 	$(call quiet-command,rm -f $@ && echo > $@,"  GEN   $(TARGET_DIR)$@")
Signature · 1 line
1.6.2.2
#23 lore raw

PATCH 17/19 qemu binary don't exist anymore. I guess not much people is compiling on alpha

In reply to [email protected]

From: Juan Quintela <[email protected]>

---
 Makefile.target |    7 -------
 1 files changed, 0 insertions(+), 7 deletions(-)
Makefile.target +0 -7
index 6a701ae..5d35ea3 100644
@@ -300,13 +300,6 @@ obj-m68k-y += m68k-sim.o m68k-semi.o
 signal.o: CFLAGS += $(HELPER_CFLAGS)
 
 ARLIBS=../libqemu_user.a libqemu.a
-
-ifeq ($(ARCH),alpha)
-# Mark as 32 bit binary, i. e. it will be mapped into the low 31 bit of
-# the address space (31 bit so sign extending doesn't matter)
-	echo -ne '\001\000\000\000' | dd of=qemu bs=1 seek=48 count=4 conv=notrunc
-endif
-
 endif #CONFIG_LINUX_USER
 
 #########################################################
Signature · 1 line
1.6.2.2
#24 lore raw

PATCH 18/19 We can wrap OS_CFLAGS/OS_LDFLAGS in CFLAGS/LDFLAGS at configure time

In reply to [email protected]

From: Juan Quintela <[email protected]>

---
 Makefile        |    4 ++--
 Makefile.hw     |    4 ++--
 Makefile.target |    4 ++--
 configure       |    6 ++----
 4 files changed, 8 insertions(+), 10 deletions(-)
Makefile +2 -2
index ddd4b16..3ba694d 100644
@@ -17,8 +17,8 @@ endif
 VPATH=$(SRC_PATH):$(SRC_PATH)/hw
 
 
-CFLAGS += $(OS_CFLAGS) $(ARCH_CFLAGS)
-LDFLAGS += $(OS_LDFLAGS) $(ARCH_LDFLAGS)
+CFLAGS +=  $(ARCH_CFLAGS)
+LDFLAGS +=  $(ARCH_LDFLAGS)
 
 CPPFLAGS += -I. -I$(SRC_PATH) -MMD -MP -MT $@
 CPPFLAGS += -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE
Makefile.hw +2 -2
index f7a9507..0cf591f 100644
@@ -8,8 +8,8 @@ include $(SRC_PATH)/rules.mak
 
 VPATH=$(SRC_PATH):$(SRC_PATH)/hw
 
-CFLAGS += $(OS_CFLAGS) $(ARCH_CFLAGS)
-LDFLAGS += $(OS_LDFLAGS) $(ARCH_LDFLAGS)
+CFLAGS += $(ARCH_CFLAGS)
+LDFLAGS += $(ARCH_LDFLAGS)
 
 CPPFLAGS += -I. -I.. -I$(SRC_PATH) -MMD -MP -MT $@
 CPPFLAGS += -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE
Makefile.target +2 -2
index 5d35ea3..ee12812 100644
@@ -60,8 +60,8 @@ ifeq ($(ARCH),ia64)
 CFLAGS+=-mno-sdata
 endif
 
-CFLAGS+=$(OS_CFLAGS) $(ARCH_CFLAGS)
-LDFLAGS+=$(OS_LDFLAGS) $(ARCH_LDFLAGS)
+CFLAGS+= $(ARCH_CFLAGS)
+LDFLAGS+= $(ARCH_LDFLAGS)
 
 CPPFLAGS+=-D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE
 CPPFLAGS+=-U_FORTIFY_SOURCE
configure +2 -4
index 29dcee6..bb41b54 100755
@@ -1490,12 +1490,10 @@ echo "AR=$ar" >> $config_mak
 # XXX: only use CFLAGS and LDFLAGS ?  
 # XXX: should export HOST_CFLAGS and HOST_LDFLAGS for cross
 # compilation of dyngen tool (useful for win32 build on Linux host)
-echo "OS_CFLAGS=$OS_CFLAGS" >> $config_mak
-echo "OS_LDFLAGS=$OS_LDFLAGS" >> $config_mak
 echo "ARCH_CFLAGS=$ARCH_CFLAGS" >> $config_mak
 echo "ARCH_LDFLAGS=$ARCH_LDFLAGS" >> $config_mak
-echo "CFLAGS=$CFLAGS" >> $config_mak
-echo "LDFLAGS=$LDFLAGS" >> $config_mak
+echo "CFLAGS=$CFLAGS $OS_CFLAGS" >> $config_mak
+echo "LDFLAGS=$LDFLAGS $OS_LDFLAGS" >> $config_mak
 echo "EXESUF=$EXESUF" >> $config_mak
 echo "PTHREADLIBS=$PTHREADLIBS" >> $config_mak
 echo "CLOCKLIBS=$CLOCKLIBS" >> $config_mak
Signature · 1 line
1.6.2.2
#25 lore raw

PATCH 19/19 We can wrap ARCH_CFLAGS/ARCH_LDFLAGS in CFLAGS/LDFLAGS at configure time

In reply to [email protected]

From: Juan Quintela <[email protected]>

---
 Makefile        |    4 ----
 Makefile.hw     |    3 ---
 Makefile.target |    3 ---
 configure       |    9 ++-------
 4 files changed, 2 insertions(+), 17 deletions(-)
Makefile +0 -4
index 3ba694d..47c55da 100644
@@ -16,10 +16,6 @@ endif
 
 VPATH=$(SRC_PATH):$(SRC_PATH)/hw
 
-
-CFLAGS +=  $(ARCH_CFLAGS)
-LDFLAGS +=  $(ARCH_LDFLAGS)
-
 CPPFLAGS += -I. -I$(SRC_PATH) -MMD -MP -MT $@
 CPPFLAGS += -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE
 CPPFLAGS += -U_FORTIFY_SOURCE
Makefile.hw +0 -3
index 0cf591f..b309160 100644
@@ -8,9 +8,6 @@ include $(SRC_PATH)/rules.mak
 
 VPATH=$(SRC_PATH):$(SRC_PATH)/hw
 
-CFLAGS += $(ARCH_CFLAGS)
-LDFLAGS += $(ARCH_LDFLAGS)
-
 CPPFLAGS += -I. -I.. -I$(SRC_PATH) -MMD -MP -MT $@
 CPPFLAGS += -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE
 CPPFLAGS+=-I$(SRC_PATH)/fpu
Makefile.target +0 -3
index ee12812..b747ef9 100644
@@ -60,9 +60,6 @@ ifeq ($(ARCH),ia64)
 CFLAGS+=-mno-sdata
 endif
 
-CFLAGS+= $(ARCH_CFLAGS)
-LDFLAGS+= $(ARCH_LDFLAGS)
-
 CPPFLAGS+=-D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE
 CPPFLAGS+=-U_FORTIFY_SOURCE
 LIBS+=-lm
configure +2 -7
index bb41b54..a3de603 100755
@@ -1487,13 +1487,8 @@ echo "INSTALL_PROG=$install -m0755 -p" >> $config_mak
 echo "CC=$cc" >> $config_mak
 echo "HOST_CC=$host_cc" >> $config_mak
 echo "AR=$ar" >> $config_mak
-# XXX: only use CFLAGS and LDFLAGS ?  
-# XXX: should export HOST_CFLAGS and HOST_LDFLAGS for cross
-# compilation of dyngen tool (useful for win32 build on Linux host)
-echo "ARCH_CFLAGS=$ARCH_CFLAGS" >> $config_mak
-echo "ARCH_LDFLAGS=$ARCH_LDFLAGS" >> $config_mak
-echo "CFLAGS=$CFLAGS $OS_CFLAGS" >> $config_mak
-echo "LDFLAGS=$LDFLAGS $OS_LDFLAGS" >> $config_mak
+echo "CFLAGS=$CFLAGS $OS_CFLAGS $ARCH_CFLAGS" >> $config_mak
+echo "LDFLAGS=$LDFLAGS $OS_LDFLAGS $ARCH_LDFLAGS" >> $config_mak
 echo "EXESUF=$EXESUF" >> $config_mak
 echo "PTHREADLIBS=$PTHREADLIBS" >> $config_mak
 echo "CLOCKLIBS=$CLOCKLIBS" >> $config_mak
Signature · 1 line
1.6.2.2