i.MX27 audmux: Fix register offsets
Subsystems (3)
Sascha Hauer
maintainerPATCH 1/1 i.MX27 audmux: Fix register offsets
The PPCR registers start at 0x10, not 0xc. Fix this.
Signed-off-by Sascha Hauer <[email protected]>
--- arch/arm/plat-mxc/include/mach/audmux.h | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-)
arch/arm/plat-mxc/include/mach/audmux.h +3 -3
@@ -4,9 +4,9 @@#define MX27_AUDMUX_HPCR1_SSI0 0#define MX27_AUDMUX_HPCR2_SSI1 1#define MX27_AUDMUX_HPCR3_SSI_PINS_4 2 -#define MX27_AUDMUX_PPCR1_SSI_PINS_1 3 -#define MX27_AUDMUX_PPCR2_SSI_PINS_2 4 -#define MX27_AUDMUX_PPCR3_SSI_PINS_3 5 +#define MX27_AUDMUX_PPCR1_SSI_PINS_1 4 +#define MX27_AUDMUX_PPCR2_SSI_PINS_2 5 +#define MX27_AUDMUX_PPCR3_SSI_PINS_3 6#define MX31_AUDMUX_PORT1_SSI0 0#define MX31_AUDMUX_PORT2_SSI1 1
Signature · 7 lines
1.6.5.2 -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |