Skip to contentSkip to conversation

bandwidth shaping question (up+downstream together)

LARTC Gunther Stammwitz 1 participant 3 messages Nov 8, 2001 – Nov 9, 2001

lore
Share & tools
lore
#0 lore raw

-----Ursprüngliche Nachricht-----
Von: Gunther Stammwitz [mailto:[email protected]]
Gesendet: Donnerstag, 8. November 2001 22:27
An: [email protected]
Betreff: bandwidth shaping question (up+downstream together)

Hello,

I'm new to bandwidth shaping and cbq and got a question. I'd like to sell "bandwidth" to my customers. For example one Megabit or 10 Mbits or whatever. It shall not play a role whether the traffic is up- or downstream. All I want to limit is the total traffic of my customers.

I've been surfing around for a while and found some scripts that allow limiting the bandwidth for an Ethernet-device or a subnet - BUT all of those programs are only intended for one direction: either up or downstream.

So.. is it possible at all to limit the "total" amount of bandwidth an Ethernet device (like eth0) and/or a subnet (like 192.168.0.0/24) can cause ?

Thanks a lot,
Gunther Stammwitz

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/

#1 lore raw

Hi.

that cant be true... oh noooooooooo !
Isn't it possible to - lets say.. create a closs of 2 mbit and divide this class into two sub-classes: one for up and one for downstream ?

thanks,
Gunther

-----Ursprüngliche Nachricht-----
Von: Stef Coene [mailto:[email protected]]
Gesendet: Freitag, 9. November 2001 07:20
An: Gunther Stammwitz
Betreff: Re: [LARTC] bandwidth shaping question (up+downstream together)

Short answer : not possible :-(

Stef

Quoted 14 lines · you

-----Ursprüngliche Nachricht-----
Von: Gunther Stammwitz [mailto:[email protected]]
Gesendet: Donnerstag, 8. November 2001 22:27
An: [email protected]
Betreff: bandwidth shaping question (up+downstream together)

Hello,

I'm new to bandwidth shaping and cbq and got a question. I'd like to sell "bandwidth" to my customers. For example one Megabit or 10 Mbits or whatever. It shall not play a role whether the traffic is up- or downstream. All I want to limit is the total traffic of my customers.

Quoted 7 lines

I've been surfing around for a while and found some scripts that allow limiting the bandwidth for an Ethernet-device or a subnet - BUT all of those programs are only intended for one direction: either up or downstream.

So.. is it possible at all to limit the "total" amount of bandwidth an Ethernet device (like eth0) and/or a subnet (like 192.168.0.0/24) can

cause

--

[email protected] [email protected]
More QOS info : http://docum.org/
Title : "Using Linux as bandwidth manager"

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/

#2 lore raw
In reply to Gunther Stammwitz

it was just an example.

What I want to do is to sell 2 MBit bandwidth to my customer. I don't care how much he uses for the up- and how much for the downsteam - it does only matter that the total bandwidth (add the two diretions) does NOT exceed 2 MBit.

Any ideas ?

Thanks,
Gunther

-----Ursprungliche Nachricht-----
Von: Michael T. Babcock [mailto:[email protected]]
Gesendet: Freitag, 9. November 2001 18:31
An: Gunther Stammwitz
Betreff: Re: [LARTC] bandwidth shaping question (up+downstream together)

Quoted 3 lines · Gunther Stammwitz

that cant be true... oh noooooooooo !
Isn't it possible to - lets say.. create a closs of 2 mbit and divide this class into two sub-classes: one for up and one for downstream ?

Can I ask why on earth you'd want to do this?

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/