bandwidth shaping question (up+downstream together)
-----Ursprüngliche Nachricht-----
Von: Gunther Stammwitz [mailto:[email protected]]
Gesendet: Donnerstag, 8. November 2001 22:27
An: [email protected]
Betreff: bandwidth shaping question (up+downstream together)
Hello,
I'm new to bandwidth shaping and cbq and got a question. I'd like to sell "bandwidth" to my customers. For example one Megabit or 10 Mbits or whatever. It shall not play a role whether the traffic is up- or downstream. All I want to limit is the total traffic of my customers.
I've been surfing around for a while and found some scripts that allow limiting the bandwidth for an Ethernet-device or a subnet - BUT all of those programs are only intended for one direction: either up or downstream.
So.. is it possible at all to limit the "total" amount of bandwidth an Ethernet device (like eth0) and/or a subnet (like 192.168.0.0/24) can cause ?
Thanks a lot,
Gunther Stammwitz
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Hi.
that cant be true... oh noooooooooo !
Isn't it possible to - lets say.. create a closs of 2 mbit and divide this class into two sub-classes: one for up and one for downstream ?
thanks,
Gunther
-----Ursprüngliche Nachricht-----
Von: Stef Coene [mailto:[email protected]]
Gesendet: Freitag, 9. November 2001 07:20
An: Gunther Stammwitz
Betreff: Re: [LARTC] bandwidth shaping question (up+downstream together)
Short answer : not possible :-(
Stef
Quoted 14 lines · you
-----Ursprüngliche Nachricht-----
Von: Gunther Stammwitz [mailto:[email protected]]
Gesendet: Donnerstag, 8. November 2001 22:27
An: [email protected]
Betreff: bandwidth shaping question (up+downstream together)Hello,
I'm new to bandwidth shaping and cbq and got a question. I'd like to sell "bandwidth" to my customers. For example one Megabit or 10 Mbits or whatever. It shall not play a role whether the traffic is up- or downstream. All I want to limit is the total traffic of my customers.
Quoted 7 lines
I've been surfing around for a while and found some scripts that allow limiting the bandwidth for an Ethernet-device or a subnet - BUT all of those programs are only intended for one direction: either up or downstream.
So.. is it possible at all to limit the "total" amount of bandwidth an Ethernet device (like eth0) and/or a subnet (like 192.168.0.0/24) can
cause
--
[email protected] [email protected]
More QOS info : http://docum.org/
Title : "Using Linux as bandwidth manager"
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
it was just an example.
What I want to do is to sell 2 MBit bandwidth to my customer. I don't care how much he uses for the up- and how much for the downsteam - it does only matter that the total bandwidth (add the two diretions) does NOT exceed 2 MBit.
Any ideas ?
Thanks,
Gunther
-----Ursprungliche Nachricht-----
Von: Michael T. Babcock [mailto:[email protected]]
Gesendet: Freitag, 9. November 2001 18:31
An: Gunther Stammwitz
Betreff: Re: [LARTC] bandwidth shaping question (up+downstream together)
Quoted 3 lines · Gunther Stammwitz
that cant be true... oh noooooooooo !
Isn't it possible to - lets say.. create a closs of 2 mbit and divide this class into two sub-classes: one for up and one for downstream ?
Can I ask why on earth you'd want to do this?
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/