Skip to contentSkip to conversation

problem with the howto sample

LARTC Patrick Nagelschmidt 3 participants 6 messages Dec 6, 2001 – Dec 7, 2001

lore
Share & tools
lore
#0 lore raw

after reading the new howto i wanted to rewrite my QoS-script, now that most parameters lost their mysteriousness. while rewriting i gave some classes new classid's which led to 'RTNETLINK answers: Invalid argument'. i decided to try the sample from the howto first, but got the same problem:

Sample configuration

This configuration limits webserver traffic to 5mbit and smtp traffic to 3 mbit, and limits the sum to 5mbit:
[...]

# tc class add dev eth0 parent 1:1 classid 10: cbq bandwidth 100Mbit  \
  rate 5Mbit weight 0.5Mbit prio 5 allot 1514 cell 8 maxburst 20      \
  avpkt 1000 bounded

the above leads to an Invalid argument. it seems that tc doesnt like the classid 10: (at least the error disappears if i change it to e.g. 1:2).

have i done something wrong or is it an error in the example? this problem leads me also to the next question:

is the naming of classes essential for building them correctly? is parent 1:1 classid 10:0 somehow different from parent 1:1 classid 1:2? up to now i thought classid was only a name and the parent would be enough to make the classes' positions in the tree unambiguously...

regards,

Patrick

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/

#1 lore raw
Quoted 8 lines · Patrick Nagelschmidt

This configuration limits webserver traffic to 5mbit and smtp traffic to 3 mbit, and limits the sum to 5mbit:
[...]

# tc class add dev eth0 parent 1:1 classid 10: cbq bandwidth 100Mbit  \
  rate 5Mbit weight 0.5Mbit prio 5 allot 1514 cell 8 maxburst 20      \
  avpkt 1000 bounded

the above leads to an Invalid argument. it seems that tc doesnt like the classid 10: (at least the error disappears if i change it to e.g. 1:2).

TC likes it just fine. It is the kernel that doesn't. This is my mistake, I decided to spruce up the examples a bit without testing them afterwards.

Quoted 1 line

have i done something wrong or is it an error in the example? this problem

Can you check if the CBQ example does work not?

Quoted 5 lines

leads me also to the next question: is the naming of classes essential for building them correctly? is parent 1:1 classid 10:0 somehow different from parent 1:1 classid 1:2? up to now i thought classid was only a name and the parent would be enough to make the classes' positions in the tree unambiguously...

Well, major numbers are a bit special in this respect. There is some stuff going on with userspace per-socket specified PRIOs helping classify traffic, the kernel does a lot of testing if you remain within your major number.

This is one of the completely never ever mentioned parts of CBQ which I hope to bug people about.

Added you to the Thanks To list, thanks!

Signature · 8 lines
http://www.PowerDNS.com          Versatile DNS Software & Services
Trilab                                 The Technology People
Netherlabs BV / Rent-a-Nerd.nl           - Nerd Available -
'SYN! .. SYN|ACK! .. ACK!' - the mating call of the internet

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
#3 lore raw
In reply to Patrick Nagelschmidt
Quoted 5 lines · Patrick Nagelschmidt
Quoted 1 line · you

Can you check if the CBQ example does work not?

this was the cbq example :)
or do you mean besides this classid?

'does work now' I mean :-) I just improved it, please see if it helped.

Quoted 3 lines
Quoted 1 line

Added you to the Thanks To list

and i allready feared to get a RTFM as reply ;)

We're not quite good enough yet that you can feel confident that everything in the HOWTO is correct. So continue beating on it!

Regards,

bert

Signature · 8 lines
http://www.PowerDNS.com          Versatile DNS Software & Services
Trilab                                 The Technology People
Netherlabs BV / Rent-a-Nerd.nl           - Nerd Available -
'SYN! .. SYN|ACK! .. ACK!' - the mating call of the internet

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
#4 lore raw
In reply to Patrick Nagelschmidt
Quoted 1 line · you

I just improved it, please see if it helped.

now everything from the cbq example executes without errors. i can't tell you if it works the way it should since i'm still learning to understand what it should do ;)

regards,

Patrick

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/

#5 lore raw
In reply to Patrick Nagelschmidt
Quoted 4 lines · Patrick Nagelschmidt

is the naming of classes essential for building them correctly? is parent 1:1 classid 10:0 somehow different from parent 1:1 classid 1:2? up to now i thought classid was only a name and the parent would be enough to make the classes' positions in the tree unambiguously...

If we were to rework the naming, something like ...

1) parent 1: classid 1:2
2) parent 1:2 classid 1:2:5
3) parent 1:2:5 classid 1:2:5:8

... would make more sense.

The numbering scheme currently in place makes very little sense and is quite wasteful of the number-space it uses (not that it matters much to most people).

If the above were used, 'parent' would become quite unnecessary of course.

Signature · 7 lines
Michael T. Babcock
CTO, FibreSpeed Ltd.     (Hosting, Security, Consultation, Database, etc)
http://www.fibrespeed.net/~mbabcock/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/