problem with the howto sample
after reading the new howto i wanted to rewrite my QoS-script, now that most parameters lost their mysteriousness. while rewriting i gave some classes new classid's which led to 'RTNETLINK answers: Invalid argument'. i decided to try the sample from the howto first, but got the same problem:
Sample configuration
This configuration limits webserver traffic to 5mbit and smtp traffic to 3 mbit, and limits the sum to 5mbit:
[...]
# tc class add dev eth0 parent 1:1 classid 10: cbq bandwidth 100Mbit \ rate 5Mbit weight 0.5Mbit prio 5 allot 1514 cell 8 maxburst 20 \ avpkt 1000 bounded
the above leads to an Invalid argument. it seems that tc doesnt like the classid 10: (at least the error disappears if i change it to e.g. 1:2).
have i done something wrong or is it an error in the example? this problem leads me also to the next question:
is the naming of classes essential for building them correctly? is parent 1:1 classid 10:0 somehow different from parent 1:1 classid 1:2? up to now i thought classid was only a name and the parent would be enough to make the classes' positions in the tree unambiguously...
regards,
Patrick
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Quoted 8 lines · Patrick Nagelschmidt
This configuration limits webserver traffic to 5mbit and smtp traffic to 3 mbit, and limits the sum to 5mbit:
[...]# tc class add dev eth0 parent 1:1 classid 10: cbq bandwidth 100Mbit \ rate 5Mbit weight 0.5Mbit prio 5 allot 1514 cell 8 maxburst 20 \ avpkt 1000 boundedthe above leads to an Invalid argument. it seems that tc doesnt like the classid 10: (at least the error disappears if i change it to e.g. 1:2).
TC likes it just fine. It is the kernel that doesn't. This is my mistake, I decided to spruce up the examples a bit without testing them afterwards.
Quoted 1 line
have i done something wrong or is it an error in the example? this problem
Can you check if the CBQ example does work not?
Quoted 5 lines
leads me also to the next question: is the naming of classes essential for building them correctly? is parent 1:1 classid 10:0 somehow different from parent 1:1 classid 1:2? up to now i thought classid was only a name and the parent would be enough to make the classes' positions in the tree unambiguously...
Well, major numbers are a bit special in this respect. There is some stuff going on with userspace per-socket specified PRIOs helping classify traffic, the kernel does a lot of testing if you remain within your major number.
This is one of the completely never ever mentioned parts of CBQ which I hope to bug people about.
Added you to the Thanks To list, thanks!
Signature · 8 lines
http://www.PowerDNS.com Versatile DNS Software & Services Trilab The Technology People Netherlabs BV / Rent-a-Nerd.nl - Nerd Available - 'SYN! .. SYN|ACK! .. ACK!' - the mating call of the internet _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Quoted 1 line · you
Can you check if the CBQ example does work not?
this was the cbq example :)
or do you mean besides this classid?
Quoted 1 line
Added you to the Thanks To list
and i allready feared to get a RTFM as reply ;)
regards,
Patrick
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Quoted 5 lines · Patrick Nagelschmidt
Quoted 1 line · you
Can you check if the CBQ example does work not?
this was the cbq example :)
or do you mean besides this classid?
'does work now' I mean :-) I just improved it, please see if it helped.
Quoted 3 lines
Quoted 1 line
Added you to the Thanks To list
and i allready feared to get a RTFM as reply ;)
We're not quite good enough yet that you can feel confident that everything in the HOWTO is correct. So continue beating on it!
Regards,
bert
Signature · 8 lines
http://www.PowerDNS.com Versatile DNS Software & Services Trilab The Technology People Netherlabs BV / Rent-a-Nerd.nl - Nerd Available - 'SYN! .. SYN|ACK! .. ACK!' - the mating call of the internet _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Quoted 1 line · you
I just improved it, please see if it helped.
now everything from the cbq example executes without errors. i can't tell you if it works the way it should since i'm still learning to understand what it should do ;)
regards,
Patrick
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Quoted 4 lines · Patrick Nagelschmidt
is the naming of classes essential for building them correctly? is parent 1:1 classid 10:0 somehow different from parent 1:1 classid 1:2? up to now i thought classid was only a name and the parent would be enough to make the classes' positions in the tree unambiguously...
If we were to rework the naming, something like ...
1) parent 1: classid 1:2
2) parent 1:2 classid 1:2:5
3) parent 1:2:5 classid 1:2:5:8
... would make more sense.
The numbering scheme currently in place makes very little sense and is quite wasteful of the number-space it uses (not that it matters much to most people).
If the above were used, 'parent' would become quite unnecessary of course.
Signature · 7 lines
Michael T. Babcock CTO, FibreSpeed Ltd. (Hosting, Security, Consultation, Database, etc) http://www.fibrespeed.net/~mbabcock/ _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/