Skip to contentSkip to conversation

problems with IMQ + Netfilter IP_LIMIT patch from

LARTC Martin Devera 1 participant 1 message Feb 15, 2002

lore
Share & tools
lore
#0 lore raw
Quoted 6 lines

Wipld (traffic monitor tool )don't show any information on eth0/1, ntop neigther.
Also i attemp to configure both programs tu get imq information:

# ntop -i imq
ntop: listening on imq
ntop: unknown physical layer type 0xffff

you can't use imq for anything else than as qdisc placeholder. There is nothing what should prevent you from looking at interface. I don't know ntop nor wipld so I don't know what could be wrong. You have to look into it and tell me whether the problem is with packet sniffing (try tcpdump on ethX) or with cat /proc/net/dev

devik

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/