problems with IMQ + Netfilter IP_LIMIT patch from
Quoted 6 lines
Wipld (traffic monitor tool )don't show any information on eth0/1, ntop neigther.
Also i attemp to configure both programs tu get imq information:# ntop -i imq ntop: listening on imq ntop: unknown physical layer type 0xffff
you can't use imq for anything else than as qdisc placeholder. There is nothing what should prevent you from looking at interface. I don't know ntop nor wipld so I don't know what could be wrong. You have to look into it and tell me whether the problem is with packet sniffing (try tcpdump on ethX) or with cat /proc/net/dev
devik
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/