CBQ and prio problem
Hi,
I'm trying to configure a Linux machine to act as a "DS router" (ie it
should manage differents priorities based on the TOS field) and as a traffic shaper too (let's say 800Kbit of 10Mbit).
I've used the following commands but i wasn't able to shape the outgoing traffic (the prio works fine).
Thanks in advance for any idea,
Max
#!/bin/sh
TC="/usr/sbin/stc"
DEVICE="eth0"
total="10Mbit"
$TC qdisc add dev $DEVICE root handle 1: cbq bandwidth $total avpkt 1000 \
cell 8
$TC class add dev $DEVICE parent 1:0 classid 1:1 cbq bandwidth $total \
rate 800Kbit allot 1514 avpkt 1000 weight 80Kbit prio 8 maxburst 20 \
mpu 64 bounded
$TC qdisc add dev $DEVICE parent 1:1 handle 100: prio bands 3 priomap 2 1 0
$TC qdisc add dev $DEVICE parent 100:1 tbf rate 10Mbit burst 10Mbit \
limit 10Mbit
$TC qdisc add dev $DEVICE parent 100:2 tbf rate 10Mbit burst 10Mbit \
limit 10Mbit
$TC qdisc add dev $DEVICE parent 100:3 tbf rate 10Mbit burst 10Mbit \
limit 10Mbit
#############FILTERS############
$TC filter add dev $DEVICE parent 1:0 prio 1 \
protocol ip u32 \
match u32 0x00200000 0x00FC0000 at 0 \
flowid 100:1$TC filter add dev $DEVICE parent 1:0 prio 1 \
protocol ip u32 \
match u32 0x00400000 0x00FC0000 at 0 \
flowid 100:2_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 9 lines · MR
Hi,
I'm trying to configure a Linux machine to act as a "DS router" (ie it
should manage differents priorities based on the TOS field) and as a traffic shaper too (let's say 800Kbit of 10Mbit).
I've used the following commands but i wasn't able to shape the outgoing traffic (the prio works fine).Thanks in advance for any idea,
Max
You create a bounded class of 800kbit. So all traffic is bounded to 800kbit.
But after that, you attach 3 tbf qdisc's with rate = 10mbit. Why? What
happens if you remove the 3 tbf qdisc's ?
Quoted 39 lines
#!/bin/sh
TC="/usr/sbin/stc"
DEVICE="eth0"
total="10Mbit"$TC qdisc add dev $DEVICE root handle 1: cbq bandwidth $total avpkt 1000 \
cell 8$TC class add dev $DEVICE parent 1:0 classid 1:1 cbq bandwidth $total \
rate 800Kbit allot 1514 avpkt 1000 weight 80Kbit prio 8 maxburst 20 \
mpu 64 bounded$TC qdisc add dev $DEVICE parent 1:1 handle 100: prio bands 3 priomap 2 1 0
$TC qdisc add dev $DEVICE parent 100:1 tbf rate 10Mbit burst 10Mbit \
limit 10Mbit
$TC qdisc add dev $DEVICE parent 100:2 tbf rate 10Mbit burst 10Mbit \
limit 10Mbit
$TC qdisc add dev $DEVICE parent 100:3 tbf rate 10Mbit burst 10Mbit \
limit 10Mbit#############FILTERS############
$TC filter add dev $DEVICE parent 1:0 prio 1 \ protocol ip u32 \ match u32 0x00200000 0x00FC0000 at 0 \ flowid 100:1$TC filter add dev $DEVICE parent 1:0 prio 1 \ protocol ip u32 \ match u32 0x00400000 0x00FC0000 at 0 \ flowid 100:2_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Signature · 7 lines
[email protected] More QOS info : http://www.docum.org/ Title : "Using Linux as bandwidth manager" _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/