Skip to contentSkip to conversation

CBQ and prio problem

LARTC MR 2 participants 2 messages Mar 4, 2002

lore
Share & tools
lore

MR

author
#0 lore raw

Hi,
I'm trying to configure a Linux machine to act as a "DS router" (ie it
should manage differents priorities based on the TOS field) and as a traffic shaper too (let's say 800Kbit of 10Mbit).
I've used the following commands but i wasn't able to shape the outgoing traffic (the prio works fine).

Thanks in advance for any idea,
Max

#!/bin/sh

TC="/usr/sbin/stc"
DEVICE="eth0"
total="10Mbit"

$TC qdisc add dev $DEVICE root handle 1: cbq bandwidth $total avpkt 1000 \
cell 8

$TC class add dev $DEVICE parent 1:0 classid 1:1 cbq bandwidth $total \
rate 800Kbit allot 1514 avpkt 1000 weight 80Kbit prio 8 maxburst 20 \
mpu 64 bounded

$TC qdisc add dev $DEVICE parent 1:1 handle 100: prio bands 3 priomap 2 1 0

$TC qdisc add dev $DEVICE parent 100:1 tbf rate 10Mbit burst 10Mbit \
limit 10Mbit
$TC qdisc add dev $DEVICE parent 100:2 tbf rate 10Mbit burst 10Mbit \
limit 10Mbit
$TC qdisc add dev $DEVICE parent 100:3 tbf rate 10Mbit burst 10Mbit \
limit 10Mbit

#############FILTERS############

$TC filter add dev $DEVICE parent 1:0 prio 1 \
        protocol ip u32 \
        match u32 0x00200000 0x00FC0000 at 0 \
        flowid 100:1
$TC filter add dev $DEVICE parent 1:0 prio 1 \
        protocol ip u32 \
        match u32 0x00400000 0x00FC0000 at 0 \
        flowid 100:2

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 9 lines · MR

Hi,
I'm trying to configure a Linux machine to act as a "DS router" (ie it
should manage differents priorities based on the TOS field) and as a traffic shaper too (let's say 800Kbit of 10Mbit).
I've used the following commands but i wasn't able to shape the outgoing traffic (the prio works fine).

Thanks in advance for any idea,
Max

You create a bounded class of 800kbit. So all traffic is bounded to 800kbit.
But after that, you attach 3 tbf qdisc's with rate = 10mbit. Why? What
happens if you remove the 3 tbf qdisc's ?

Quoted 39 lines

#!/bin/sh

TC="/usr/sbin/stc"
DEVICE="eth0"
total="10Mbit"

$TC qdisc add dev $DEVICE root handle 1: cbq bandwidth $total avpkt 1000 \
cell 8

$TC class add dev $DEVICE parent 1:0 classid 1:1 cbq bandwidth $total \
rate 800Kbit allot 1514 avpkt 1000 weight 80Kbit prio 8 maxburst 20 \
mpu 64 bounded

$TC qdisc add dev $DEVICE parent 1:1 handle 100: prio bands 3 priomap 2 1 0

$TC qdisc add dev $DEVICE parent 100:1 tbf rate 10Mbit burst 10Mbit \
limit 10Mbit
$TC qdisc add dev $DEVICE parent 100:2 tbf rate 10Mbit burst 10Mbit \
limit 10Mbit
$TC qdisc add dev $DEVICE parent 100:3 tbf rate 10Mbit burst 10Mbit \
limit 10Mbit

#############FILTERS############

$TC filter add dev $DEVICE parent 1:0 prio 1 \
        protocol ip u32 \
        match u32 0x00200000 0x00FC0000 at 0 \
        flowid 100:1
$TC filter add dev $DEVICE parent 1:0 prio 1 \
        protocol ip u32 \
        match u32 0x00400000 0x00FC0000 at 0 \
        flowid 100:2

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Signature · 7 lines
[email protected]
 More QOS info : http://www.docum.org/
 Title : "Using Linux as bandwidth manager"

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/