Skip to contentSkip to conversation

Beginner "prio" question...

LARTC eth 2 participants 2 messages Mar 5, 2002

lore
Share & tools
lore

eth

author
#0 lore raw

I keep reading through documentation an I don't really get it:

If I set a prio qdisc on an interface like this:

tc qdisc del dev eth0 root
tc qdisc add dev eth0 root handle 10: prio

... and I don't set any tc filters, all the traffic goes in bands 1, 2 or 3 based on the TOS field?

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 10 lines · eth

I keep reading through documentation an I don't really get it:

If I set a prio qdisc on an interface like this:

tc qdisc del dev eth0 root
tc qdisc add dev eth0 root handle 10: prio

... and I don't set any tc filters, all the traffic goes in bands 1, 2 or 3 based on the TOS field?

Yes. This is explained at length on http://lartc.org and on
http://lartc.org/manpages

Regards,

bert

Signature · 6 lines
http://www.PowerDNS.com          Versatile DNS Software & Services
http://www.tk                              the dot in .tk
http://lartc.org           Linux Advanced Routing & Traffic Control HOWTO
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/