Beginner "prio" question...
I keep reading through documentation an I don't really get it:
If I set a prio qdisc on an interface like this:
tc qdisc del dev eth0 root
tc qdisc add dev eth0 root handle 10: prio
... and I don't set any tc filters, all the traffic goes in bands 1, 2 or 3 based on the TOS field?
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 10 lines · eth
I keep reading through documentation an I don't really get it:
If I set a prio qdisc on an interface like this:
tc qdisc del dev eth0 root
tc qdisc add dev eth0 root handle 10: prio... and I don't set any tc filters, all the traffic goes in bands 1, 2 or 3 based on the TOS field?
Yes. This is explained at length on http://lartc.org and on
http://lartc.org/manpages
Regards,
bert
Signature · 6 lines
http://www.PowerDNS.com Versatile DNS Software & Services http://www.tk the dot in .tk http://lartc.org Linux Advanced Routing & Traffic Control HOWTO _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/