Hash tables
hey all,
I was looking through the script and trying to work out more example entries to jump start me for when I can test the script and noticed in the filters the following after I had added the filters to check eth1 for dst address.
// for eth0 -> Internet filtering on source address $TC filter add dev eth0 parent 1:0 prio 5 u32 \
ht 1:6: match ip src $ALIAS2 flowid 1:2
$TC filter add dev eth0 parent 1:0 prio 5 handle\
::1 u32 ht 800:: match ip nofrag \
offset mask 0x0F00 shift 6 \
hashkey mask 0x00ff0000 at 8 link 1:
// for somewhere -> eth1 filtering on destination address $TC filter add dev eth1 parent 2:0 prio 5 u32 \
ht 1:6: match ip dst $ALIAS2 flowid 2:2
$TC filter add dev eth1 parent 2:0 prio 5 handle\
::1 u32 ht 800:: match ip nofrag \
offset mask 0x0F00 shift 6 \
hashkey mask 0x00ff0000 at 8 link 2:
The first block seems correct to me. However the second doesn't. Can anyone verify this and explain why/how?
thanks,
chuck
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/