Skip to contentSkip to conversation

Hash tables

LARTC Charles Williams 1 participant 1 message Mar 31, 2002

lore
Share & tools
lore
#0 lore raw

hey all,

I was looking through the script and trying to work out more example entries to jump start me for when I can test the script and noticed in the filters the following after I had added the filters to check eth1 for dst address.

// for eth0 -> Internet filtering on source address $TC filter add dev eth0 parent 1:0 prio 5 u32 \
ht 1:6: match ip src $ALIAS2 flowid 1:2
$TC filter add dev eth0 parent 1:0 prio 5 handle\
::1 u32 ht 800:: match ip nofrag \
offset mask 0x0F00 shift 6 \
hashkey mask 0x00ff0000 at 8 link 1:

// for somewhere -> eth1 filtering on destination address $TC filter add dev eth1 parent 2:0 prio 5 u32 \
ht 1:6: match ip dst $ALIAS2 flowid 2:2
$TC filter add dev eth1 parent 2:0 prio 5 handle\
::1 u32 ht 800:: match ip nofrag \
offset mask 0x0F00 shift 6 \
hashkey mask 0x00ff0000 at 8 link 2:

The first block seems correct to me. However the second doesn't. Can anyone verify this and explain why/how?

thanks,
chuck

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/