IMQ not working :-(
I think I am doing all well, but IMQ is not capturing my incoming packets (tc statics show 0 packets on imq0)
How could I have a log to find where is the problem ?
Signature · 14 lines
__o
_ \<_
(_)/(_)
Saludos de Julián
EA4ACL
-.-
Foro Wireless Madrid
http://opennetworks.rg3.net
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/did you ifconfig imq0 up ?
Quoted 16 lines · On Tue, 28 May 2002, [ISO-8859-1] Julián Muñoz wrote:
I think I am doing all well, but IMQ is not capturing my incoming packets (tc statics show 0 packets on imq0)
How could I have a log to find where is the problem ?
--
__o _ \<_(_)/(_)
Saludos de Julián
EA4ACL
-.-
Quoted 8 lines
Foro Wireless Madrid
http://opennetworks.rg3.net_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
make sure imq0 is up and you have a rule like "iptables -t mangle -A PREROUTING -i eth0 -j IMQ".
patrick
Quoted 5 lines · Julián Muñoz
I think I am doing all well, but IMQ is not capturing my incoming packets (tc statics show 0 packets on imq0)
How could I have a log to find where is the problem ?
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 2 lines · Patrick McHardy
make sure imq0 is up and you have a rule like "iptables -t mangle -A PREROUTING -i eth0 -j IMQ".
If you do "iptables -L PREROUTING -t mangle" just after this, I don't see the IMQ rule in the list.
I am using the precompiled iptables library (iptables 1.2.5), so maybe they don't match well with my iptable (1.2.2) ?
Signature · 14 lines
__o
_ \<_
(_)/(_)
Saludos de Julián
EA4ACL
-.-
Foro Wireless Madrid
http://opennetworks.rg3.net
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/Solved, I had to install a more modern iptable :-)
Now ingress traffic shapping seem to work, just testing it with ksnuffle
(in order to see the graph of the traffic) :-)
Quoted 12 lines · Julián Muñoz
Quoted 2 lines · Patrick McHardy
make sure imq0 is up and you have a rule like "iptables -t mangle -A PREROUTING -i eth0 -j IMQ".
If you do "iptables -L PREROUTING -t mangle" just after this, I don't see the IMQ rule in the list.
I am using the precompiled iptables library (iptables 1.2.5), so maybe they don't match well with my iptable (1.2.2) ?
Signature · 14 lines
__o
_ \<_
(_)/(_)
Saludos de Julián
EA4ACL
-.-
Foro Wireless Madrid
http://opennetworks.rg3.net
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/