Skip to contentSkip to conversation

IMQ not working :-(

LARTC Julián Muñoz 3 participants 5 messages May 28, 2002 – May 29, 2002

lore
Share & tools
lore
#0 lore raw

I think I am doing all well, but IMQ is not capturing my incoming packets (tc statics show 0 packets on imq0)

How could I have a log to find where is the problem ?

Signature · 14 lines
      __o
    _ \<_
   (_)/(_)

Saludos de Julián
EA4ACL
-.-

Foro Wireless Madrid
http://opennetworks.rg3.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#1 lore raw

did you ifconfig imq0 up ?

Quoted 16 lines · On Tue, 28 May 2002, [ISO-8859-1] Julián Muñoz wrote:

I think I am doing all well, but IMQ is not capturing my incoming packets (tc statics show 0 packets on imq0)

How could I have a log to find where is the problem ?

--

      __o
    _ \<_

(_)/(_)

Saludos de Julián
EA4ACL
-.-

Quoted 8 lines

Foro Wireless Madrid
http://opennetworks.rg3.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw
In reply to Julián Muñoz

make sure imq0 is up and you have a rule like "iptables -t mangle -A PREROUTING -i eth0 -j IMQ".

patrick

Quoted 5 lines · Julián Muñoz

I think I am doing all well, but IMQ is not capturing my incoming packets (tc statics show 0 packets on imq0)

How could I have a log to find where is the problem ?

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#3 lore raw
In reply to Julián Muñoz
Quoted 2 lines · Patrick McHardy

make sure imq0 is up and you have a rule like "iptables -t mangle -A PREROUTING -i eth0 -j IMQ".

If you do "iptables -L PREROUTING -t mangle" just after this, I don't see the IMQ rule in the list.

I am using the precompiled iptables library (iptables 1.2.5), so maybe they don't match well with my iptable (1.2.2) ?

Signature · 14 lines
      __o
    _ \<_
   (_)/(_)

Saludos de Julián
EA4ACL
-.-

Foro Wireless Madrid
http://opennetworks.rg3.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#4 lore raw
In reply to Julián Muñoz

Solved, I had to install a more modern iptable :-)

Now ingress traffic shapping seem to work, just testing it with ksnuffle
(in order to see the graph of the traffic) :-)

Quoted 12 lines · Julián Muñoz
Quoted 2 lines · Patrick McHardy

make sure imq0 is up and you have a rule like "iptables -t mangle -A PREROUTING -i eth0 -j IMQ".

If you do "iptables -L PREROUTING -t mangle" just after this, I don't see the IMQ rule in the list.

I am using the precompiled iptables library (iptables 1.2.5), so maybe they don't match well with my iptable (1.2.2) ?

Signature · 14 lines
      __o
    _ \<_
   (_)/(_)

Saludos de Julián
EA4ACL
-.-

Foro Wireless Madrid
http://opennetworks.rg3.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/