Why this stupid ingress tc does not work ?
Hi !
I wanted to shape my analog modem connection so I took these two lines from the 'wondershaper' script:
tc qdisc add dev $DEV handle ffff: ingress
#tc filter add dev $DEV parent ffff: protocol ip prio 50 u32 match ip \ src 0.0.0.0/0 police rate ${DOWNLINK} burst 10k drop flowid :1
with DEV=ppp0 and DOWNLINK$kbit.
But, when I activate it, nothing comes back from the web, no ping.
'tc -s qdisc' gives:
qdisc ingress ffff: dev ppp0 ----------------
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
I can see the packets or ping replies with a tcpdump -i ppp0 but the packets do not seem to reach applications !
I run kernel 2.4.18... what's the problem ?
Cheers,
Ludovic Drolez.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
----- Original Message -----
From: "ludo" <[email protected]>
To: <[email protected]>
Sent: Thursday, June 13, 2002 1:22 AM
Subject: [LARTC] Why this stupid ingress tc does not work ?
Quoted 12 lines
Hi !
I wanted to shape my analog modem connection so I took these two lines from the 'wondershaper' script:
tc qdisc add dev $DEV handle ffff: ingress
#tc filter add dev $DEV parent ffff: protocol ip prio 50 u32 match ip \ src 0.0.0.0/0 police rate ${DOWNLINK} burst 10k drop flowid :1
Quoted 7 lines
with DEV=ppp0 and DOWNLINK$kbit.
But, when I activate it, nothing comes back from the web, no ping.'tc -s qdisc' gives:
qdisc ingress ffff: dev ppp0 ----------------
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
In fact, the qdisc does work, only the output of the byte and packet count is not implemented I guess.
Cheers,
Jan
Quoted 7 lines
I can see the packets or ping replies with a tcpdump -i ppp0 but the packets do not seem to reach applications !
I run kernel 2.4.18... what's the problem ?
Quoted 9 lines
Cheers,
Ludovic Drolez.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi,
I suggest you to use IMQ device. This makes possible to shape & queue incomiong trafic.
Bye,
Tadas
Thu, Jun 13, 2002 at 09:49:46AM +0200, Jan Coppens raðë:
Quoted 24 lines
----- Original Message -----
From: "ludo" <[email protected]>
To: <[email protected]>
Sent: Thursday, June 13, 2002 1:22 AM
Subject: [LARTC] Why this stupid ingress tc does not work ?Quoted 17 lines
Hi !
I wanted to shape my analog modem connection so I took these two lines from the 'wondershaper' script:
tc qdisc add dev $DEV handle ffff: ingress
#tc filter add dev $DEV parent ffff: protocol ip prio 50 u32 match ip \ src 0.0.0.0/0 police rate ${DOWNLINK} burst 10k drop flowid :1
with DEV=ppp0 and DOWNLINK$kbit.
But, when I activate it, nothing comes back from the web, no ping.'tc -s qdisc' gives:
Quoted 14 lines
Quoted 2 lines
qdisc ingress ffff: dev ppp0 ----------------
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)In fact, the qdisc does work, only the output of the byte and packet count is not implemented I guess.
Cheers,
JanQuoted 5 lines
I can see the packets or ping replies with a tcpdump -i ppp0 but the packets do not seem to reach applications !
I run kernel 2.4.18... what's the problem ?
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 1 line
In fact, the qdisc does work, only the output of the byte and packet
count
Quoted 1 line
is not implemented I guess.
Ok but, in the previous example, the qdisc does not seem to work... I do not see packets going back to the ppp0 interface !
Weird, since these lines are taken from the wondershaper script...
Any idea ? TC does not work with analog modems ?
Signature · 7 lines
Ludovic DROLEZ Free&ALter Soft 152, rue de Grigy - Technopole Metz 2000 57070 METZ tel : 03 87 75 55 21 fax : 03 87 75 19 26 _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/