Skip to contentSkip to conversation

Why this stupid ingress tc does not work ?

LARTC ludo 3 participants 4 messages Jun 12, 2002 – Jun 14, 2002

lore
Share & tools
lore

ludo

author
#0 lore raw

Hi !

I wanted to shape my analog modem connection so I took these two lines from the 'wondershaper' script:

tc qdisc add dev $DEV handle ffff: ingress

#tc filter add dev $DEV parent ffff: protocol ip prio 50 u32 match ip \ src 0.0.0.0/0 police rate ${DOWNLINK} burst 10k drop flowid :1

with DEV=ppp0 and DOWNLINK$kbit.
But, when I activate it, nothing comes back from the web, no ping.

'tc -s qdisc' gives:

qdisc ingress ffff: dev ppp0 ----------------
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)

I can see the packets or ping replies with a tcpdump -i ppp0 but the packets do not seem to reach applications !

I run kernel 2.4.18... what's the problem ?

Cheers,

Ludovic Drolez.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

----- Original Message -----
From: "ludo" <[email protected]>
To: <[email protected]>
Sent: Thursday, June 13, 2002 1:22 AM
Subject: [LARTC] Why this stupid ingress tc does not work ?

Quoted 12 lines

Hi !

I wanted to shape my analog modem connection so I took these two lines from the 'wondershaper' script:

tc qdisc add dev $DEV handle ffff: ingress

#tc filter add dev $DEV parent ffff: protocol ip prio 50 u32 match ip \ src 0.0.0.0/0 police rate ${DOWNLINK} burst 10k drop flowid :1

Quoted 7 lines

with DEV=ppp0 and DOWNLINK$kbit.
But, when I activate it, nothing comes back from the web, no ping.

'tc -s qdisc' gives:

qdisc ingress ffff: dev ppp0 ----------------
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)

In fact, the qdisc does work, only the output of the byte and packet count is not implemented I guess.

Cheers,
Jan

Quoted 7 lines

I can see the packets or ping replies with a tcpdump -i ppp0 but the packets do not seem to reach applications !

I run kernel 2.4.18... what's the problem ?

Quoted 9 lines

Cheers,

Ludovic Drolez.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw
In reply to ludo

Hi,

I suggest you to use IMQ device. This makes possible to shape & queue incomiong trafic.

Bye,
Tadas

Thu, Jun 13, 2002 at 09:49:46AM +0200, Jan Coppens raðë:

Quoted 24 lines

----- Original Message -----
From: "ludo" <[email protected]>
To: <[email protected]>
Sent: Thursday, June 13, 2002 1:22 AM
Subject: [LARTC] Why this stupid ingress tc does not work ?

Quoted 17 lines

Hi !

I wanted to shape my analog modem connection so I took these two lines from the 'wondershaper' script:

tc qdisc add dev $DEV handle ffff: ingress

#tc filter add dev $DEV parent ffff: protocol ip prio 50 u32 match ip \ src 0.0.0.0/0 police rate ${DOWNLINK} burst 10k drop flowid :1

with DEV=ppp0 and DOWNLINK$kbit.
But, when I activate it, nothing comes back from the web, no ping.

'tc -s qdisc' gives:

Quoted 14 lines
Quoted 2 lines

qdisc ingress ffff: dev ppp0 ----------------
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)

In fact, the qdisc does work, only the output of the byte and packet count is not implemented I guess.

Cheers,
Jan

Quoted 5 lines

I can see the packets or ping replies with a tcpdump -i ppp0 but the packets do not seem to reach applications !

I run kernel 2.4.18... what's the problem ?

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#3 lore raw
In reply to ludo
Quoted 1 line

In fact, the qdisc does work, only the output of the byte and packet

count

Quoted 1 line

is not implemented I guess.

Ok but, in the previous example, the qdisc does not seem to work... I do not see packets going back to the ppp0 interface !

Weird, since these lines are taken from the wondershaper script...

Any idea ? TC does not work with analog modems ?

Signature · 7 lines
Ludovic DROLEZ                                       Free&ALter Soft
152, rue de Grigy - Technopole Metz 2000                  57070 METZ
tel : 03 87 75 55 21                            fax : 03 87 75 19 26

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/