priority for voip
hello group,
i just want to know, if i can do some priority based routing for
voice packets, send from my machine?
can any one tell me how can that be done?
thanks
ganesh
_________________________________________________________
There is always a better job for you at Monsterindia.com. Go now http://monsterindia.com/rediffin/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 3 lines · ganesh kumar godavari
hello group,
i just want to know, if i can do some priority based routing for
voice packets, send from my machine?
Yes you can.
Quoted 1 line
can any one tell me how can that be done?
www.lartc.org
www.docum.org
The archive of this list.
Stef
Signature · 7 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
priorize udp trafic, or based on tos, if previously marked by the system
C
Quoted 61 lines · ganesh kumar godavari
hello stef,
this is the information i got from microsoft website
(http://support.microsoft.com/default.aspx?scid=kb;EN-US;q158623)***************************
NetMeeting uses the following Internet Protocol (IP) ports:
Port Purpose
-------------------------------------389 Internet Locator Server [Transmission Control Protocol (TCP)] 522 User Location Server (TCP) 1503 T.120 (TCP) 1720 H.323 call setup (TCP) 1731 Audio call control (TCP) Dynamic H.323 call control (TCP) Dynamic H.323 streaming [Realtime Transport Protocol (RTP) overUser Datagram Protocol (UDP)]
To establish outbound NetMeeting connections through a firewall, the firewall must be configured to do the following:
Pass through primary TCP connections on ports 522, 389, 1503, 1720 and 1731.Pass through secondary UDP connections on dynamically assigned ports (1024-65535).
*******************************so as u can see there is no way of determining the port if it were dynamic
any pointers in this regard would be helpful
thanks
ganeshQuoted 7 lines · On Tue, 02 Jul 2002 Stef Coene wrote :
Quoted 6 lines · ganesh kumar godavari
hai stef,
i looked into your docum.org and lartc.org. for information on
giving high priority for voice packets.
i did check with the netfilter group for information on identifying if a packet is a voice/data packet.Quoted 15 lines
Quoted 3 lines
i received no response from them. so can u please tell me how i can identify if a packet is a voice/data packet so that i can mangle it and send to high priority queue.
I have no idea how you can identify voip packets. Is it using a fixed dst
port of maybe host so you can use that in the filter?Stef
Signature · 4 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net
Quoted 7 lines
_________________________________________________________
There is always a better job for you at Monsterindia.com. Go now http://monsterindia.com/rediffin/_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/