Skip to contentSkip to conversation

priority for voip

LARTC ganesh kumar godavari 3 participants 3 messages Jul 1, 2002

lore
Share & tools
lore
#0 lore raw

hello group,
i just want to know, if i can do some priority based routing for
voice packets, send from my machine?

can any one tell me how can that be done?

thanks
ganesh
_________________________________________________________
There is always a better job for you at Monsterindia.com. Go now http://monsterindia.com/rediffin/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 3 lines · ganesh kumar godavari

hello group,
i just want to know, if i can do some priority based routing for
voice packets, send from my machine?

Yes you can.

Quoted 1 line

can any one tell me how can that be done?

www.lartc.org
www.docum.org
The archive of this list.

Stef

Signature · 7 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.openprojects.net
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to ganesh kumar godavari

priorize udp trafic, or based on tos, if previously marked by the system

C

Quoted 61 lines · ganesh kumar godavari

hello stef,
this is the information i got from microsoft website
(http://support.microsoft.com/default.aspx?scid=kb;EN-US;q158623)

***************************
NetMeeting uses the following Internet Protocol (IP) ports:
Port Purpose
-------------------------------------

   389       Internet Locator Server [Transmission Control Protocol (TCP)]
   522       User Location Server (TCP)
   1503      T.120 (TCP)
   1720      H.323 call setup (TCP)
   1731      Audio call control (TCP)
   Dynamic   H.323 call control (TCP)
   Dynamic   H.323 streaming [Realtime Transport Protocol (RTP) over 

User Datagram Protocol (UDP)]
To establish outbound NetMeeting connections through a firewall, the firewall must be configured to do the following:
Pass through primary TCP connections on ports 522, 389, 1503, 1720 and 1731.

Pass through secondary UDP connections on dynamically assigned ports (1024-65535).
*******************************

so as u can see there is no way of determining the port if it were dynamic

any pointers in this regard would be helpful

thanks
ganesh

Quoted 7 lines · On Tue, 02 Jul 2002 Stef Coene wrote :
Quoted 6 lines · ganesh kumar godavari

hai stef,
i looked into your docum.org and lartc.org. for information on
giving high priority for voice packets.
i did check with the netfilter group for information on identifying if a packet is a voice/data packet.

Quoted 15 lines
Quoted 3 lines

i received no response from them. so can u please tell me how i can identify if a packet is a voice/data packet so that i can mangle it and send to high priority queue.

I have no idea how you can identify voip packets. Is it using a fixed dst
port of maybe host so you can use that in the filter?

Stef

Signature · 4 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.openprojects.net
Quoted 7 lines

_________________________________________________________
There is always a better job for you at Monsterindia.com. Go now http://monsterindia.com/rediffin/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/