Skip to contentSkip to conversation

really weird problem with 2.2.20 kernel

LARTC Jussi Mäki 2 participants 3 messages Aug 13, 2002 – Aug 14, 2002

lore
Share & tools
lore
#0 lore raw

I'm trying to limit the available bandwidth for an single ip address, i've got 3 different scripts which all work with kernel 2.2.17 and all the 2.4.x kernel's i've tested..

The problem is that when for example i limit the traffic to 512kbit/s i'm only getting about 300kbit/s and this is only with 2.2.20 kernel..

I've tried htb and cbq with different schudulers like sfq and pfifo and all of them have the exact same problem.

I'm not very keen on upgrading to kernel 2.4.x as i have to upgrade quite a few machine's at once and none of them have compilation tools.

Any ideas?

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 7 lines · Jussi Mäki

I'm trying to limit the available bandwidth for an single ip address, i've got 3 different scripts which all work with kernel 2.2.17 and all the 2.4.x kernel's i've tested..

The problem is that when for example i limit the traffic to 512kbit/s i'm only getting about 300kbit/s and this is only with 2.2.20 kernel..

Quoted 7 lines

I've tried htb and cbq with different schudulers like sfq and pfifo and all of them have the exact same problem.

I'm not very keen on upgrading to kernel 2.4.x as i have to upgrade quite a few machine's at once and none of them have compilation tools.

Any ideas?

What if you have no qos enabled? Maybe it's a driver or hardware problem.

Stef

Signature · 7 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Jussi Mäki
Quoted 8 lines · Jussi Mäki
Quoted 7 lines

I'm trying to limit the available bandwidth for an single ip address, i've got 3 different scripts which all work with kernel 2.2.17 and all the 2.4.x kernel's i've tested..

The problem is that when for example i limit the traffic to 512kbit/s i'm only getting about 300kbit/s and this is only with 2.2.20 kernel..

Quoted 8 lines
Quoted 7 lines

I've tried htb and cbq with different schudulers like sfq and pfifo and all of them have the exact same problem.

I'm not very keen on upgrading to kernel 2.4.x as i have to upgrade quite a few machine's at once and none of them have compilation tools.

Any ideas?

What if you have no qos enabled? Maybe it's a driver or hardware problem.

Then it isnt limited in any way. And i've tried with different hardware, with different ethernet cards.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/