really weird problem with 2.2.20 kernel
I'm trying to limit the available bandwidth for an single ip address, i've got 3 different scripts which all work with kernel 2.2.17 and all the 2.4.x kernel's i've tested..
The problem is that when for example i limit the traffic to 512kbit/s i'm only getting about 300kbit/s and this is only with 2.2.20 kernel..
I've tried htb and cbq with different schudulers like sfq and pfifo and all of them have the exact same problem.
I'm not very keen on upgrading to kernel 2.4.x as i have to upgrade quite a few machine's at once and none of them have compilation tools.
Any ideas?
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 7 lines · Jussi Mäki
I'm trying to limit the available bandwidth for an single ip address, i've got 3 different scripts which all work with kernel 2.2.17 and all the 2.4.x kernel's i've tested..
The problem is that when for example i limit the traffic to 512kbit/s i'm only getting about 300kbit/s and this is only with 2.2.20 kernel..
Quoted 7 lines
I've tried htb and cbq with different schudulers like sfq and pfifo and all of them have the exact same problem.
I'm not very keen on upgrading to kernel 2.4.x as i have to upgrade quite a few machine's at once and none of them have compilation tools.
Any ideas?
What if you have no qos enabled? Maybe it's a driver or hardware problem.
Stef
Signature · 7 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 8 lines · Jussi Mäki
Quoted 7 lines
I'm trying to limit the available bandwidth for an single ip address, i've got 3 different scripts which all work with kernel 2.2.17 and all the 2.4.x kernel's i've tested..
The problem is that when for example i limit the traffic to 512kbit/s i'm only getting about 300kbit/s and this is only with 2.2.20 kernel..
Quoted 8 lines
Quoted 7 lines
I've tried htb and cbq with different schudulers like sfq and pfifo and all of them have the exact same problem.
I'm not very keen on upgrading to kernel 2.4.x as i have to upgrade quite a few machine's at once and none of them have compilation tools.
Any ideas?
What if you have no qos enabled? Maybe it's a driver or hardware problem.
Then it isnt limited in any way. And i've tried with different hardware, with different ethernet cards.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/