Skip to contentSkip to conversation

uplink with multiple lines

LARTC Calvin Dodge 2 participants 2 messages Aug 20, 2002

lore
Share & tools
lore
#0 lore raw

I've been trying - without success - to aggregate the bandwidth of 3 DSL modems using the instructions in the HowTo (sections 4.2.1 and 4.2.2).

I _believe_ I'm following the instructions to the letter, but when I add the last command (the "ip route" with "nexthop") then nothing goes out through the modems.

Each modem works when I add a single default gateway pointing to it, so I don't believe the modems are the problem.

Two of the modems _do_ have private IP addresses (192.168.x.1) - could that be confusing the kernel? If so, do I need to get public IP addresses for those modems?

Do I HAVE to create a patched kernel (ala Anastasov)?

May I post the script I used to try this out?

Thanks, folks!

Calvin Dodge
Certified Linux Bigot (tm)
http://www.caldodge.fpcc.net
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

Hello,

Quoted 3 lines · Calvin Dodge

Two of the modems _do_ have private IP addresses (192.168.x.1) - could that be confusing the kernel? If so, do I need to get public IP addresses for those modems?

AFAIK, there is not flag "public" for the IP addresses in
Linux, at least, not in IPv4. The kernel does not know anything about private/reserved IP ranges.

Quoted 1 line

Do I HAVE to create a patched kernel (ala Anastasov)?

May be not. But you can try to understand the settings
provided in the docs. The essential thing to understand is how the ip rules and routes are ordered, how the NAT uses the routing, why the NAT in plain kernels sometimes breaks with multipath routes, what kind of nexthops the kernel can live with, can you live without dead gateway detection, if not, how it works (in kernel? help from user space?), etc.

Quoted 1 line

May I post the script I used to try this out?

Or if possible to provide reference to it after the 5th
reading of all docs :)

Quoted 5 lines

Thanks, folks!

Calvin Dodge
Certified Linux Bigot (tm)
http://www.caldodge.fpcc.net

Regards

--
Julian Anastasov <[email protected]>

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/