4 nic advanced routing question
I have scoured the net, gotten a few pointers from several people and looked at several books and still have not come up with a satisfactory solution.
I know someone has done it!
Can some one point me to a reference for how to route two wan nics and two internal nics on the same box.
I have tried using ip add to setup two separate lookup tables and route tables but to know avail. Any help greatly appreciated!
This is what I have
66.92.114.46 66.92.114.46 209.141.2.194
| |
xxxxxxxxxxxxxxxx
RedHat 7.3 will run ShoreWall xxxxxxxxxxxxxxxx
192.168.119.101 192.168.120.101
| | each network will have servers running here 192.168.119.100 192.168.119.100 192.168.120.100
xxxxxxxxxxxxxxxxx
failover box
xxxxxxxxxxxxxxxxx
192.168.121.101
internal mail server
ip ru
0: from all lookup local 32766: from all lookup main 32767: from all lookup 253
ip ro
66.92.114.32/28 dev eth0 scope link
209.141.2.192/27 dev eth1 scope link 192.168.119.0/24 dev eth2 scope link 192.168.120.0/24 dev eth3 scope link
127.0.0.0/8 dev lo scope link default via 66.92.114.33 dev eth0
A fecha Tue, Sep 10, 2002 at 12:02:44PM -0400, Thad Marsh dijo:
Quoted 4 lines
I have scoured the net, gotten a few pointers from several people and looked at several books and still have not come up with a satisfactory solution.
Perhaps it's because of my mail reader not properly
opening html documents, but I'd ask you to make a diagram or even a drawing, with arrows included, that would help a lot. Please take into account possible NATings between networks too.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 5 lines · Juan Antonio Morillas Cerezo
Perhaps it's because of my mail reader not properly opening html documents, but I'd ask you to make a diagram or even a drawing, with arrows included, that would help a lot. Please take into account possible NATings between networks too.
I'm not sure why you're having a problem:
------_=_NextPart_001_01C258E3.801CD380
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
His document was encoded properly ...
Signature · 8 lines
Michael T. Babcock C.T.O., FibreSpeed Ltd. http://www.fibrespeed.net/~mbabcock _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 3 lines · Michael T. Babcock
I'm not sure why you're having a problem:
His document was encoded properly ...
Yes, multipart/alternative, but I think what the reader was trying to say us that the ASCII version of the email seems to include some kind of ASCII-art that depicts the sender's network. But at least in my email client the drawing seems broken and gives no clues about topology.
Signature · 5 lines
Jose Luis Domingo Lopez Linux Registered User #189436 Debian Linux Woody (Linux 2.4.19-pre6aa1) _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hello,
Quoted 2 lines · Thad Marsh
Can some one point me to a reference for how to route two wan nics and two internal nics on the same box.
Here you can find some documents and patches on this issue:
Regards
--
Julian Anastasov <[email protected]>
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/