Skip to contentSkip to conversation

4 nic advanced routing question

LARTC Thad Marsh 5 participants 5 messages Sep 10, 2002

lore
Share & tools
lore

Thad Marsh

author
#0 lore raw

I have scoured the net, gotten a few pointers from several people and looked at several books and still have not come up with a satisfactory solution.

I know someone has done it!

Can some one point me to a reference for how to route two wan nics and two internal nics on the same box.

I have tried using ip add to setup two separate lookup tables and route tables but to know avail. Any help greatly appreciated!

This is what I have

66.92.114.46 66.92.114.46 209.141.2.194
| |
xxxxxxxxxxxxxxxx
RedHat 7.3 will run ShoreWall xxxxxxxxxxxxxxxx
192.168.119.101 192.168.120.101

            |                                   |                                   each network will have servers running here
192.168.119.100                  192.168.119.100                  192.168.120.100

xxxxxxxxxxxxxxxxx
failover box
xxxxxxxxxxxxxxxxx
192.168.121.101
internal mail server

ip ru

0:      from all lookup local
32766:  from all lookup main
32767:  from all lookup 253

ip ro
66.92.114.32/28 dev eth0 scope link

209.141.2.192/27 dev eth1  scope link
192.168.119.0/24 dev eth2  scope link
192.168.120.0/24 dev eth3  scope link

127.0.0.0/8 dev lo scope link default via 66.92.114.33 dev eth0

#1 lore raw

A fecha Tue, Sep 10, 2002 at 12:02:44PM -0400, Thad Marsh dijo:

Quoted 4 lines

I have scoured the net, gotten a few pointers from several people and looked at several books and still have not come up with a satisfactory solution.

Perhaps it's because of my mail reader not properly
opening html documents, but I'd ask you to make a diagram or even a drawing, with arrows included, that would help a lot. Please take into account possible NATings between networks too.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw
In reply to Thad Marsh
Quoted 5 lines · Juan Antonio Morillas Cerezo

Perhaps it's because of my mail reader not properly opening html documents, but I'd ask you to make a diagram or even a drawing, with arrows included, that would help a lot. Please take into account possible NATings between networks too.

I'm not sure why you're having a problem:

------_=_NextPart_001_01C258E3.801CD380

Content-Type: text/plain;
	charset="iso-8859-1"

Content-Transfer-Encoding: quoted-printable

His document was encoded properly ...

Signature · 8 lines
Michael T. Babcock
C.T.O., FibreSpeed Ltd.
http://www.fibrespeed.net/~mbabcock


_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#3 lore raw
In reply to Thad Marsh
Quoted 3 lines · Michael T. Babcock

I'm not sure why you're having a problem:
His document was encoded properly ...

Yes, multipart/alternative, but I think what the reader was trying to say us that the ASCII version of the email seems to include some kind of ASCII-art that depicts the sender's network. But at least in my email client the drawing seems broken and gives no clues about topology.

Signature · 5 lines
Jose Luis Domingo Lopez
Linux Registered User #189436     Debian Linux Woody (Linux 2.4.19-pre6aa1)
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#4 lore raw
In reply to Thad Marsh

Hello,

Quoted 2 lines · Thad Marsh

Can some one point me to a reference for how to route two wan nics and two internal nics on the same box.

Here you can find some documents and patches on this issue:

http://www.ssi.bg/~ja/#routes

Regards

--
Julian Anastasov <[email protected]>

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/