Skip to contentSkip to conversation

Multicasting routing in SUSE

LARTC Anirban Chakraborti 2 participants 2 messages Sep 16, 2002

lore
Share & tools
lore
#0 lore raw

hi all,

This is my first message to the group.My name is Anirban Chakraborti and I am with new mexico state university.

I have recently built a router using suse linux.I need to turn on IGMP and PIM to allow it do multicasting.How to do that? Secondly I also want to control the rate of the datatransfer from the router's ethernet interface to the ppp interface.

Thanks for the help,

Anirban

---------------------------------
Do you Yahoo!?
Yahoo! News - Today's headlines

#1 lore raw
Quoted 2 lines · Anirban Chakraborti

I have recently built a router using suse linux.I need to turn on IGMP and PIM to allow it do multicasting.How to do that? Secondly I also want to control the rate of the datatransfer from the router's ethernet interface to the ppp interface.

To enable multicast support and multicast routing, you _maybe_ will need to recompile your kernel, but I would say that any recent SuSE distribution probably have the already compiled on. Just check boot messages (execute dmesg o see /var/log/*). If you need to recompile the kernel, go to and select:
Networking options ---> [*] TCP/IP networking
---> [*] IP: multicasting

                    ---> [*]   IP: multicast routing

[*] IP: PIM-SM version 1 support (NEW)
[*] IP: PIM-SM version 2 support (NEW)

And the recompile as usual.

To limit traffic, even if it is multicast, check the HOWTO, list archives and scripts at lartc.org.

Hope this helps.

Signature · 5 lines
Jose Luis Domingo Lopez
Linux Registered User #189436     Debian Linux Woody (Linux 2.4.19-pre6aa1)
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/