Multicasting routing in SUSE
hi all,
This is my first message to the group.My name is Anirban Chakraborti and I am with new mexico state university.
I have recently built a router using suse linux.I need to turn on IGMP and PIM to allow it do multicasting.How to do that? Secondly I also want to control the rate of the datatransfer from the router's ethernet interface to the ppp interface.
Thanks for the help,
Anirban
---------------------------------
Do you Yahoo!?
Yahoo! News - Today's headlines
Quoted 2 lines · Anirban Chakraborti
I have recently built a router using suse linux.I need to turn on IGMP and PIM to allow it do multicasting.How to do that? Secondly I also want to control the rate of the datatransfer from the router's ethernet interface to the ppp interface.
To enable multicast support and multicast routing, you _maybe_ will need to recompile your kernel, but I would say that any recent SuSE distribution probably have the already compiled on. Just check boot messages (execute dmesg o see /var/log/*). If you need to recompile the kernel, go to and select:
Networking options ---> [*] TCP/IP networking
---> [*] IP: multicasting
---> [*] IP: multicast routing
[*] IP: PIM-SM version 1 support (NEW)
[*] IP: PIM-SM version 2 support (NEW)
And the recompile as usual.
To limit traffic, even if it is multicast, check the HOWTO, list archives and scripts at lartc.org.
Hope this helps.
Signature · 5 lines
Jose Luis Domingo Lopez Linux Registered User #189436 Debian Linux Woody (Linux 2.4.19-pre6aa1) _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/