latency simulation
Hi,
how could I achieve a simulation of Bandwidth _and_ Latency?
In detail, I need to simulate the characteristics of ISDN and DSL on a simple Ethernet-Connection:
ISDN 64 Kbit/s und 10 ms latency
DSL 128 Kbit/s und 50 ms latency
I would use HTB for the limitation of the Bandwidth, but how am I able to increase the latency?
Thank you in advance,
Hannes
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 4 lines · Hannes Ebner
Hi,
how could I achieve a simulation of Bandwidth _and_ Latency?
Quoted 8 lines
In detail, I need to simulate the characteristics of ISDN and DSL on a simple Ethernet-Connection:
ISDN 64 Kbit/s und 10 ms latency
DSL 128 Kbit/s und 50 ms latencyI would use HTB for the limitation of the Bandwidth, but how am I able to increase the latency?
Take a look at nist :
http://snad.ncsl.nist.gov/itg/nistnet/
I once tried it and it works.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi Leonardo,
Quoted 3 lines
Have a look to tbf. It has a selectable latency parameter that adjust
the queue length. http://lartc.org/lartc.txt paragraph 9.2.2. Token
Bucket Filter can give you more information.
from the HOWTO: "...the latency parameter, which specifies the maximum amount of time a packet can sit in the TBF...".
_Can_ sit in the TBF, not _will_ sit. Therefore it is also possible to get the packet forwarded with a latency smaller than the one I have given to the TBF - but I need a method to decrease it to a fixed amount.
Regards,
Hannes
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi Stef,
Quoted 6 lines · Stef Coene
Quoted 2 lines
I would use HTB for the limitation of the Bandwidth, but how am I able to increase the latency?
Take a look at nist :
http://snad.ncsl.nist.gov/itg/nistnet/
I once tried it and it works.
thank you, a very powerful tool!
Regards,
Hannes
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 11 lines · Hannes Ebner
Hi Stef,
Quoted 6 lines · Stef Coene
Quoted 2 lines
I would use HTB for the limitation of the Bandwidth, but how am I able to increase the latency?
Take a look at nist :
http://snad.ncsl.nist.gov/itg/nistnet/
I once tried it and it works.thank you, a very powerful tool!
Let me know if it works for you.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi Hannes,
You are right. Thank to Stef for the information. I´ll take a copy too.
Best regards,
Leonardo Balliache
Quoted 15 lines · you
Message: 5
Date: Wed, 18 Sep 2002 10:04:36 +0200
From: Hannes Ebner <[email protected]>
To: [email protected]
Subject: Re: [LARTC] latency simulationHi Leonardo,
Quoted 3 lines
Have a look to tbf. It has a selectable latency parameter that adjust
the queue length. http://lartc.org/lartc.txt paragraph 9.2.2. Token
Bucket Filter can give you more information.from the HOWTO: "...the latency parameter, which specifies the maximum amount of time a packet can sit in the TBF...".
Quoted 6 lines
_Can_ sit in the TBF, not _will_ sit. Therefore it is also possible to get the packet forwarded with a latency smaller than the one I have given to the TBF - but I need a method to decrease it to a fixed amount.
Regards,
Hannes
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/