Skip to contentSkip to conversation

latency simulation

LARTC Hannes Ebner 3 participants 6 messages Sep 17, 2002 – Sep 19, 2002

lore
Share & tools
lore
#0 lore raw

Hi,

how could I achieve a simulation of Bandwidth _and_ Latency?

In detail, I need to simulate the characteristics of ISDN and DSL on a simple Ethernet-Connection:

ISDN 64 Kbit/s und 10 ms latency
DSL 128 Kbit/s und 50 ms latency

I would use HTB for the limitation of the Bandwidth, but how am I able to increase the latency?

Thank you in advance,
Hannes

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 4 lines · Hannes Ebner

Hi,

how could I achieve a simulation of Bandwidth _and_ Latency?

Quoted 8 lines

In detail, I need to simulate the characteristics of ISDN and DSL on a simple Ethernet-Connection:

ISDN 64 Kbit/s und 10 ms latency
DSL 128 Kbit/s und 50 ms latency

I would use HTB for the limitation of the Bandwidth, but how am I able to increase the latency?

Take a look at nist :
http://snad.ncsl.nist.gov/itg/nistnet/
I once tried it and it works.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Hannes Ebner

Hi Leonardo,

Quoted 3 lines

Have a look to tbf. It has a selectable latency parameter that adjust
the queue length. http://lartc.org/lartc.txt paragraph 9.2.2. Token
Bucket Filter can give you more information.

from the HOWTO: "...the latency parameter, which specifies the maximum amount of time a packet can sit in the TBF...".

_Can_ sit in the TBF, not _will_ sit. Therefore it is also possible to get the packet forwarded with a latency smaller than the one I have given to the TBF - but I need a method to decrease it to a fixed amount.

Regards,
Hannes

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#3 lore raw
In reply to Hannes Ebner

Hi Stef,

Quoted 6 lines · Stef Coene
Quoted 2 lines

I would use HTB for the limitation of the Bandwidth, but how am I able to increase the latency?

Take a look at nist :
http://snad.ncsl.nist.gov/itg/nistnet/
I once tried it and it works.

thank you, a very powerful tool!

Regards,
Hannes

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#4 lore raw
In reply to Hannes Ebner
Quoted 11 lines · Hannes Ebner

Hi Stef,

Quoted 6 lines · Stef Coene
Quoted 2 lines

I would use HTB for the limitation of the Bandwidth, but how am I able to increase the latency?

Take a look at nist :
http://snad.ncsl.nist.gov/itg/nistnet/
I once tried it and it works.

thank you, a very powerful tool!

Let me know if it works for you.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#5 lore raw
In reply to Hannes Ebner

Hi Hannes,

You are right. Thank to Stef for the information. I´ll take a copy too.

Best regards,

Leonardo Balliache

Quoted 15 lines · you

Message: 5
Date: Wed, 18 Sep 2002 10:04:36 +0200
From: Hannes Ebner <[email protected]>
To: [email protected]
Subject: Re: [LARTC] latency simulation

Hi Leonardo,

Quoted 3 lines

Have a look to tbf. It has a selectable latency parameter that adjust
the queue length. http://lartc.org/lartc.txt paragraph 9.2.2. Token
Bucket Filter can give you more information.

from the HOWTO: "...the latency parameter, which specifies the maximum amount of time a packet can sit in the TBF...".

Quoted 6 lines

_Can_ sit in the TBF, not _will_ sit. Therefore it is also possible to get the packet forwarded with a latency smaller than the one I have given to the TBF - but I need a method to decrease it to a fixed amount.

Regards,
Hannes

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/