Problem routing packets using fwmark and netfilter
Folks,
I will install in a near future a firewall/router on which two NICs
are connected to two different ISPs. I have read the iproute2 documentation and have been able to do some policy routing.
SUCCESSFUL TEST
---------------
Let's start with a simple ping test. I will ping two known computers on the internet using different gateways.
Following are the commands I have entered to enable policy routing using
the destination address as the routing key (Suppose that eth0 and
eth1 are the NICs connected to my ISPs):
ip route add $LAN1 dev eth0 src $MYADDR1 table lan1 ip route add default via $GATEWAY1 table lan1
ip route add $LAN2 dev eth1 src $MYADDR2 table lan2 ip route add default via $GATEWAY2 table lan2
ip rule add to $TESTMACHINE1 table lan1
ip rule add to $TESTMACHINE2 table lan2
Now, pinging $TESTMACHINE1 or $TESTMACHINE2 shows the expected behaviour.
MY PROBLEM
----------
Suppose I want to do some policy routing using the fwmark as a routing key. I should have entered the following commands:
iptables -t mangle -A OUTPUT -o eth0 -p icmp --icmp-type \
-d $TESTMACHINE1 -j MARK --set-mark 1
iptables -t mangle -A OUTPUT -o eth1 -p icmp --icmp-type \
-d $TESTMACHINE2 -j MARK --set-mark 2
ip rule add fwmark 1 table lan1
ip rule add fwmark 2 table lan2
Now, pinging $TESTMACHINE1 or $TESTMACHINE2 always uses the same gateway! The iptables rule counters increment as expected but it seems that the fwmark has no effect on routing !!!
MY CONFIGURATION
----------------
RedHat 7.2 on i686
Kernel 2.4.20-pre9 (all options related to advanced routing are enabled) Today's CVS snapshot of the Netfilter project
Any suggestion would be greatly appreciated !!!
Stephane.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 10 lines · Stephane Ouellette
MY PROBLEM
----------Suppose I want to do some policy routing using the fwmark as a routing key. I should have entered the following commands:
iptables -t mangle -A OUTPUT -o eth0 -p icmp --icmp-type \
-d $TESTMACHINE1 -j MARK --set-mark 1
iptables -t mangle -A OUTPUT -o eth1 -p icmp --icmp-type \
-d $TESTMACHINE2 -j MARK --set-mark 2
I'd remove the '-o' option as you don't know yet where the packets would be routed to.
Ramin
PS. You forgot the --icmp-type argument. Did your linux box take these commands?
Quoted 17 lines
ip rule add fwmark 1 table lan1
ip rule add fwmark 2 table lan2Now, pinging $TESTMACHINE1 or $TESTMACHINE2 always uses the same gateway! The iptables rule counters increment as expected but it seems that the fwmark has no effect on routing !!!
MY CONFIGURATION
----------------RedHat 7.2 on i686
Kernel 2.4.20-pre9 (all options related to advanced routing are enabled) Today's CVS snapshot of the Netfilter project
Quoted 8 lines
Any suggestion would be greatly appreciated !!!
Stephane.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 18 lines · Ramin Alidousti
Quoted 10 lines · Stephane Ouellette
MY PROBLEM
----------Suppose I want to do some policy routing using the fwmark as a routing key. I should have entered the following commands:
iptables -t mangle -A OUTPUT -o eth0 -p icmp --icmp-type \
-d $TESTMACHINE1 -j MARK --set-mark 1
iptables -t mangle -A OUTPUT -o eth1 -p icmp --icmp-type \
-d $TESTMACHINE2 -j MARK --set-mark 2I'd remove the '-o' option as you don't know yet where the packets would be routed to.
Quoted 4 lines
Ramin
PS. You forgot the --icmp-type argument. Did your linux box take these commands?
Ramin,
I mistyped the commands I entered. In fact, you should read:
iptables -t mangle -A OUTPUT -p icmp --icmp-type echo-request \
-d $TESTMACHINE1 -j MARK --set-mark 1
iptables -t mangle -A OUTPUT -p icmp --icmp-type echo-request \
-d $TESTMACHINE2 -j MARK --set-mark 2
Stephane
Quoted 19 lines
Quoted 19 lines
ip rule add fwmark 1 table lan1
ip rule add fwmark 2 table lan2Now, pinging $TESTMACHINE1 or $TESTMACHINE2 always uses the same gateway! The iptables rule counters increment as expected but it seems that the fwmark has no effect on routing !!!
MY CONFIGURATION
----------------RedHat 7.2 on i686
Kernel 2.4.20-pre9 (all options related to advanced routing are enabled) Today's CVS snapshot of the Netfilter project
Quoted 10 lines
Quoted 8 lines
Any suggestion would be greatly appreciated !!!
Stephane.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 12 lines · Stephane Ouellette
Quoted 12 lines
Quoted 7 lines
Suppose I want to do some policy routing using the fwmark as a routing key. I should have entered the following commands:
iptables -t mangle -A OUTPUT -o eth0 -p icmp --icmp-type \
-d $TESTMACHINE1 -j MARK --set-mark 1
iptables -t mangle -A OUTPUT -o eth1 -p icmp --icmp-type \
-d $TESTMACHINE2 -j MARK --set-mark 2I'd remove the '-o' option as you don't know yet where the packets would be routed to.
Quoted 8 lines
Quoted 4 lines
Ramin
PS. You forgot the --icmp-type argument. Did your linux box take these commands?Ramin,
I mistyped the commands I entered. In fact, you should read:
That's what I figured :-)
But anyway, did you try these rules without the '-o' options? Another point is that if I remember correctly, either mangle or nat used to have problems with the OUTPUT chain in the past.
Ramin
Quoted 7 lines
iptables -t mangle -A OUTPUT -p icmp --icmp-type echo-request \
-d $TESTMACHINE1 -j MARK --set-mark 1
iptables -t mangle -A OUTPUT -p icmp --icmp-type echo-request \
-d $TESTMACHINE2 -j MARK --set-mark 2Stephane
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/