Wondershaper and favoring UDP traffic
I'd like to put all UDP traffic from ports 28000-28099 into the high-priority queue that WonderShaper creates. (This is game traffic, so it's highly sensitive to latency and dropping. Alas, the game authors didn't mark the packets for QoS.) What would be the best way to insure it gets into the right queue? Right now it looks like it's going in the middle (default) queue.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 6 lines · Kenneth Porter
I'd like to put all UDP traffic from ports 28000-28099 into the high-priority queue that WonderShaper creates. (This is game traffic, so it's highly sensitive to latency and dropping. Alas, the game authors didn't mark the packets for QoS.) What would be the best way to insure it gets into the right queue? Right now it looks like it's going in the middle (default) queue.
Add a u32 filter and put all traffic in band 2. If you open the wondershaper script, you find some examples of the filter commands.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/