Skip to contentSkip to conversation

Wondershaper and favoring UDP traffic

LARTC Kenneth Porter 2 participants 2 messages Nov 4, 2002

lore
Share & tools
lore
#0 lore raw

I'd like to put all UDP traffic from ports 28000-28099 into the high-priority queue that WonderShaper creates. (This is game traffic, so it's highly sensitive to latency and dropping. Alas, the game authors didn't mark the packets for QoS.) What would be the best way to insure it gets into the right queue? Right now it looks like it's going in the middle (default) queue.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 6 lines · Kenneth Porter

I'd like to put all UDP traffic from ports 28000-28099 into the high-priority queue that WonderShaper creates. (This is game traffic, so it's highly sensitive to latency and dropping. Alas, the game authors didn't mark the packets for QoS.) What would be the best way to insure it gets into the right queue? Right now it looks like it's going in the middle (default) queue.

Add a u32 filter and put all traffic in band 2. If you open the wondershaper script, you find some examples of the filter commands.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/