Skip to contentSkip to conversation

help, strange question about tcp and udp traffic control?

LARTC [email protected] 2 participants 2 messages Nov 6, 2002

lore
Share & tools
lore
#0 lore raw

Hi ;

    +--------+           +-----------+                     +--------+
    | server |---------- | linux box |---------------------| Client |
    +--------+           +-----------+                     +--------+

MY script:

tc-htb3 qdisc del dev eth1 root
ipchains -F

tc-htb3 qdisc add dev eth1 root handle 10: htb default 20 r2q 40

tc-htb3 class add dev eth1 parent 10: classid 10:1 htb rate 50Mbit burst
2000

tc-htb3 class add dev eth1 parent 10:1 classid 10:100 htb rate 12mbit ceil 13mbit prio 1
tc-htb3 class add dev eth1 parent 10:1 classid 10:20 htb rate 38mbit ceil 50Mbit prio 7

ipchains -A fw -s 10.1.1.1 -d 10.1.5.1 -m 100
ipchains -A fw -s 0.0.0.0 -d 0.0.0.0 -j ACCEPT

tc-htb3 filter add dev eth1 protocol ip parent 10:0 prio 1 handle 100 fw classid 10:100

I've find one strange question about traffic control when sending udp data and tcp data.
Could you explain it ? thanks

question:

WHEN I measure maximum UDP bandwidth by using "Iperf -1.6 -s -u" in server host and "iperf-1.6 -c <server address> -u -b 50m" in client host, the bandwidth is 12.1mbit.
OK. work well.

BUT
WHEN I measure maximum TCP bandwidth by using"Iperf -1.6 -s " in server host and "iperf-1.6 -c <server address> " in client host, the bandwidth is only 3.1mbit.
WHY ?

haipe

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 46 lines · On Wednesday 06 November 2002 15:07, [email protected] wrote:

Hi ;

    +--------+           +-----------+                     +--------+

    | server |---------- | linux box |---------------------| Client |

    +--------+           +-----------+                     +--------+

MY script:

tc-htb3 qdisc del dev eth1 root
ipchains -F

tc-htb3 qdisc add dev eth1 root handle 10: htb default 20 r2q 40

tc-htb3 class add dev eth1 parent 10: classid 10:1 htb rate 50Mbit burst
2000

tc-htb3 class add dev eth1 parent 10:1 classid 10:100 htb rate 12mbit ceil 13mbit prio 1
tc-htb3 class add dev eth1 parent 10:1 classid 10:20 htb rate 38mbit ceil 50Mbit prio 7

ipchains -A fw -s 10.1.1.1 -d 10.1.5.1 -m 100
ipchains -A fw -s 0.0.0.0 -d 0.0.0.0 -j ACCEPT

tc-htb3 filter add dev eth1 protocol ip parent 10:0 prio 1 handle 100 fw classid 10:100

I've find one strange question about traffic control when sending udp data and tcp data.
Could you explain it ? thanks

question:

WHEN I measure maximum UDP bandwidth by using "Iperf -1.6 -s -u" in server host and "iperf-1.6 -c <server address> -u -b 50m" in client host, the bandwidth is 12.1mbit.
OK. work well.

Quoted 5 lines

BUT
WHEN I measure maximum TCP bandwidth by using"Iperf -1.6 -s " in server host and "iperf-1.6 -c <server address> " in client host, the bandwidth is only 3.1mbit.
WHY ?

I'm not sure, but your burst is way to low. Can you remove the burst parameter from class 10:1 and try again ??
And can you check the tc and ipchains counters so the packets are placed in the queue you want ?

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/