help, strange question about tcp and udp traffic control?
Hi ;
+--------+ +-----------+ +--------+
| server |---------- | linux box |---------------------| Client |
+--------+ +-----------+ +--------+MY script:
tc-htb3 qdisc del dev eth1 root
ipchains -F
tc-htb3 qdisc add dev eth1 root handle 10: htb default 20 r2q 40
tc-htb3 class add dev eth1 parent 10: classid 10:1 htb rate 50Mbit burst
2000
tc-htb3 class add dev eth1 parent 10:1 classid 10:100 htb rate 12mbit ceil 13mbit prio 1
tc-htb3 class add dev eth1 parent 10:1 classid 10:20 htb rate 38mbit ceil 50Mbit prio 7
ipchains -A fw -s 10.1.1.1 -d 10.1.5.1 -m 100
ipchains -A fw -s 0.0.0.0 -d 0.0.0.0 -j ACCEPT
tc-htb3 filter add dev eth1 protocol ip parent 10:0 prio 1 handle 100 fw classid 10:100
I've find one strange question about traffic control when sending udp data and tcp data.
Could you explain it ? thanks
question:
WHEN I measure maximum UDP bandwidth by using "Iperf -1.6 -s -u" in server host and "iperf-1.6 -c <server address> -u -b 50m" in client host, the bandwidth is 12.1mbit.
OK. work well.
BUT
WHEN I measure maximum TCP bandwidth by using"Iperf -1.6 -s " in server host and "iperf-1.6 -c <server address> " in client host, the bandwidth is only 3.1mbit.
WHY ?
haipe
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 46 lines · On Wednesday 06 November 2002 15:07, [email protected] wrote:
Hi ;
+--------+ +-----------+ +--------+ | server |---------- | linux box |---------------------| Client | +--------+ +-----------+ +--------+MY script:
tc-htb3 qdisc del dev eth1 root
ipchains -Ftc-htb3 qdisc add dev eth1 root handle 10: htb default 20 r2q 40
tc-htb3 class add dev eth1 parent 10: classid 10:1 htb rate 50Mbit burst
2000tc-htb3 class add dev eth1 parent 10:1 classid 10:100 htb rate 12mbit ceil 13mbit prio 1
tc-htb3 class add dev eth1 parent 10:1 classid 10:20 htb rate 38mbit ceil 50Mbit prio 7ipchains -A fw -s 10.1.1.1 -d 10.1.5.1 -m 100
ipchains -A fw -s 0.0.0.0 -d 0.0.0.0 -j ACCEPTtc-htb3 filter add dev eth1 protocol ip parent 10:0 prio 1 handle 100 fw classid 10:100
I've find one strange question about traffic control when sending udp data and tcp data.
Could you explain it ? thanksquestion:
WHEN I measure maximum UDP bandwidth by using "Iperf -1.6 -s -u" in server host and "iperf-1.6 -c <server address> -u -b 50m" in client host, the bandwidth is 12.1mbit.
OK. work well.
Quoted 5 lines
BUT
WHEN I measure maximum TCP bandwidth by using"Iperf -1.6 -s " in server host and "iperf-1.6 -c <server address> " in client host, the bandwidth is only 3.1mbit.
WHY ?
I'm not sure, but your burst is way to low. Can you remove the burst parameter from class 10:1 and try again ??
And can you check the tc and ipchains counters so the packets are placed in the queue you want ?
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/