Skip to contentSkip to conversation

TC HTB Traffic Shaping

LARTC Reginald R. Richardson 2 participants 3 messages Nov 22, 2002

lore
Share & tools
lore
#0 lore raw

Hi guys,

I'm new to TC HTB traffic shaping....

I installed it at my first try on my Bearing Leaf Router/Firewall

I use the tc -s class show dev eth? To see my output
All looks dandy and nice, but it's figures, of which at current momment looks like French to me,

I would like to see exactly what these figures looks like in a GRAPH style...

I know I can use MRTG, I do have some litte expience in it.. But I need to figure out, what will be THE TARGET to caputre to output via the VARIOIUS class from HTB....

If Mrtg, is not the best tool for this...can some one tell me of something very simple, not to much programming language to see, my output in a graph style..

What would be also very nice, if some on has a config file for MRTG or what every other tool propose, if they can e-mail it to me, for me to atleast get an ideal, how to build up the TARGET that should be monitored..

Thnks

__________________________________________________________________
Reginald Richardson
ICQ#: 365841
Current ICQ status:
+ More ways to contact me
__________________________________________________________________
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 4 lines · Reginald R. Richardson

Hi guys,

I'm new to TC HTB traffic shaping....

Quoted 8 lines

I installed it at my first try on my Bearing Leaf Router/Firewall

I use the tc -s class show dev eth? To see my output
All looks dandy and nice, but it's figures, of which at current momment looks like French to me,

I would like to see exactly what these figures looks like in a GRAPH style...

http://home.docum.org/stef.coene/qos/gui/rrd.html

Quoted 4 lines

I know I can use MRTG, I do have some litte expience in it.. But I need to figure out, what will be THE TARGET to caputre to output via the VARIOIUS class from HTB....

Quoted 8 lines

If Mrtg, is not the best tool for this...can some one tell me of something very simple, not to much programming language to see, my output in a graph style..

What would be also very nice, if some on has a config file for MRTG or what every other tool propose, if they can e-mail it to me, for me to atleast get an ideal, how to build up the TARGET that should be monitored..

More info on www.docum.org under "gui".
I use rrdtool to store and graph the data. Rrdtool is part of the mrtg package.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Reginald R. Richardson

I must give credit where credit is DUE

THnks a LOT...this is a well PUT Together site, I couldn't ask for a better documentation about Traffic Shapping, I received way more infor, than I ask for...

And your website, give me more insight about Traffic Shapping, even better than the HTB website..

Job well don Mr. Coene

Quoted 36 lines

-----Original Message-----
From: Stef Coene [mailto:[email protected]]
Sent: Friday, November 22, 2002 16:45
To: Reginald R. Richardson; [email protected]
Subject: Re: [LARTC] TC HTB Traffic Shaping

Quoted 11 lines · Reginald R. Richardson

Hi guys,

I'm new to TC HTB traffic shaping....

I installed it at my first try on my Bearing Leaf Router/Firewall

I use the tc -s class show dev eth? To see my output All looks dandy and nice, but it's figures, of which at current momment looks like French to me,

I would like to see exactly what these figures looks like

in a GRAPH

Quoted 1 line

style...

http://home.docum.org/stef.coene/qos/gui/rrd.html

Quoted 2 lines

I know I can use MRTG, I do have some litte expience in it.. But I need to figure out, what will be THE TARGET to caputre to

output via

Quoted 7 lines

the VARIOIUS class from HTB....

If Mrtg, is not the best tool for this...can some one tell me of something very simple, not to much programming language to see, my output in a graph style..

What would be also very nice, if some on has a config file

for MRTG or

Quoted 1 line

what every other tool propose, if they can e-mail it to me,

for me to

Quoted 17 lines
Quoted 2 lines

atleast get an ideal, how to build up the TARGET that should be monitored..

More info on www.docum.org under "gui".
I use rrdtool to store and graph the data. Rrdtool is part of the mrtg
package.

Stef

Signature · 4 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/