TC HTB Traffic Shaping
Hi guys,
I'm new to TC HTB traffic shaping....
I installed it at my first try on my Bearing Leaf Router/Firewall
I use the tc -s class show dev eth? To see my output
All looks dandy and nice, but it's figures, of which at current momment looks like French to me,
I would like to see exactly what these figures looks like in a GRAPH style...
I know I can use MRTG, I do have some litte expience in it.. But I need to figure out, what will be THE TARGET to caputre to output via the VARIOIUS class from HTB....
If Mrtg, is not the best tool for this...can some one tell me of something very simple, not to much programming language to see, my output in a graph style..
What would be also very nice, if some on has a config file for MRTG or what every other tool propose, if they can e-mail it to me, for me to atleast get an ideal, how to build up the TARGET that should be monitored..
Thnks
__________________________________________________________________
Reginald Richardson
ICQ#: 365841
Current ICQ status:
+ More ways to contact me
__________________________________________________________________
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 4 lines · Reginald R. Richardson
Hi guys,
I'm new to TC HTB traffic shaping....
Quoted 8 lines
I installed it at my first try on my Bearing Leaf Router/Firewall
I use the tc -s class show dev eth? To see my output
All looks dandy and nice, but it's figures, of which at current momment looks like French to me,I would like to see exactly what these figures looks like in a GRAPH style...
http://home.docum.org/stef.coene/qos/gui/rrd.html
Quoted 4 lines
I know I can use MRTG, I do have some litte expience in it.. But I need to figure out, what will be THE TARGET to caputre to output via the VARIOIUS class from HTB....
Quoted 8 lines
If Mrtg, is not the best tool for this...can some one tell me of something very simple, not to much programming language to see, my output in a graph style..
What would be also very nice, if some on has a config file for MRTG or what every other tool propose, if they can e-mail it to me, for me to atleast get an ideal, how to build up the TARGET that should be monitored..
More info on www.docum.org under "gui".
I use rrdtool to store and graph the data. Rrdtool is part of the mrtg package.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
I must give credit where credit is DUE
THnks a LOT...this is a well PUT Together site, I couldn't ask for a better documentation about Traffic Shapping, I received way more infor, than I ask for...
And your website, give me more insight about Traffic Shapping, even better than the HTB website..
Job well don Mr. Coene
Quoted 36 lines
-----Original Message-----
From: Stef Coene [mailto:[email protected]]
Sent: Friday, November 22, 2002 16:45
To: Reginald R. Richardson; [email protected]
Subject: Re: [LARTC] TC HTB Traffic ShapingQuoted 11 lines · Reginald R. Richardson
Hi guys,
I'm new to TC HTB traffic shaping....
I installed it at my first try on my Bearing Leaf Router/Firewall
I use the tc -s class show dev eth? To see my output All looks dandy and nice, but it's figures, of which at current momment looks like French to me,
I would like to see exactly what these figures looks like
in a GRAPH
Quoted 1 line
style...
http://home.docum.org/stef.coene/qos/gui/rrd.html
Quoted 2 lines
I know I can use MRTG, I do have some litte expience in it.. But I need to figure out, what will be THE TARGET to caputre to
output via
Quoted 7 lines
the VARIOIUS class from HTB....
If Mrtg, is not the best tool for this...can some one tell me of something very simple, not to much programming language to see, my output in a graph style..
What would be also very nice, if some on has a config file
for MRTG or
Quoted 1 line
what every other tool propose, if they can e-mail it to me,
for me to
Quoted 17 lines
Quoted 2 lines
atleast get an ideal, how to build up the TARGET that should be monitored..
More info on www.docum.org under "gui".
I use rrdtool to store and graph the data. Rrdtool is part of the mrtg
package.Stef
Signature · 4 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/