a question about tc filter
hi, all
i run the following scripts :
tc qdisc add dev eth0 handle ffff: ingress
tc filter add dev eth0 parent ffff: protocol ip \
pref 4 u32 match ip dst 10.0.0.1 flowid :1
my question is :
can i know how many packets are matched by
this filter?
if i can , what should i do to get this
counter value, then.
thanks :)
_________________________________________________________________
MSN 8 helps eliminate e-mail viruses. Get 2 months FREE*.
http://join.msn.com/?pageþatures/virus
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 11 lines · Folke Aeon
hi, all
i run the following scripts :
tc qdisc add dev eth0 handle ffff: ingress
tc filter add dev eth0 parent ffff: protocol ip \pref 4 u32 match ip dst 10.0.0.1 flowid :1my question is :
can i know how many packets are matched by
this filter?
No
Quoted 2 lines
if i can , what should i do to get this
counter value, then.
But you can make a iptables rule that matches the same packets. Iptables has builtin counters for bytes and packets.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
thanks :)
but what if i setup color-aware filters for AF PHB? say, there is two filters , both have to match the packets from the source ip 10.0.0.1/24 to the destination 10.0.1.1/24 , and at same time, the first one with a police rate and a burst size and a continue option, while the second one with a relatively lower priority which will match the packets excess the police rate. thus, the iptables cannot tell me the two colored-counters value respectively, it can only tell me the total packets matched by the two filters , am i right?
Quoted 25 lines
From: Stef Coene <[email protected]>
To: "Folke Aeon" <[email protected]>, [email protected]
Subject: Re: [LARTC] a question about tc filter
Date: Sun, 1 Dec 2002 10:58:50 +0100Quoted 11 lines · Folke Aeon
hi, all
i run the following scripts :
tc qdisc add dev eth0 handle ffff: ingress
tc filter add dev eth0 parent ffff: protocol ip \pref 4 u32 match ip dst 10.0.0.1 flowid :1my question is :
can i know how many packets are matched by
this filter?No
Quoted 2 lines
if i can , what should i do to get this
counter value, then.But you can make a iptables rule that matches the same packets. Iptables has
builtin counters for bytes and packets.
Quoted 8 lines
Stef
--
[email protected]
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net
_________________________________________________________________
Add photos to your e-mail with MSN 8. Get 2 months FREE*.
http://join.msn.com/?pageþatures/featuredemail
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/