Skip to contentSkip to conversation

100 Mbit/64 Kbit problem..

LARTC Petre Daniel 2 participants 2 messages Dec 8, 2002

lore
Share & tools
lore
#0 lore raw

Hello.im pretty new in advanced routing and limiting issues. i have read a little and decided to ask you guys before anything else. this is a simple graph of my home network:

cli1 cli2 cli3
| | |
eth0 eth1 | | |
BBone --------- [ME] --------(100Mbit Switch) cli5

       256Kbit       100Mbit         |      \        |
                                     |        \      |
                                   cli4      (10Mbit Hub)
                                                 |
                                                 |eth1
                                              [server]  
                                                 |eth0
                                                 |
                                      cli6---(10Mbit Hub)--cli7

As i originally limited the traffic with cbq.init,all the clients had 64 kbps outside the network,but inside too.So like,if i ping the eth1 interface of the [server] it was like 0.5 ms,but if i'd ping the eth0 there were like 3,4 seconds.
Basically i want all the LAN clients to have 100 or 10 Mbits inside,in my [ME] eth1 interface,and limited at 64 Kbits only outside the network.

I'd appreciate if you'll give me some hints in creating the correct cbq ierarchy to have at least full 10 Mbit inside and for all the clients the 64 Kbit limit outside of [ME].

Thanks in advance.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 29 lines · Petre Daniel

Hello.im pretty new in advanced routing and limiting issues. i have read a little and decided to ask you guys before anything else. this is a simple graph of my home network:

cli1 cli2 cli3

eth0 eth1 | | |
BBone --------- [ME] --------(100Mbit Switch) cli5
256Kbit 100Mbit | \ |

| \ |

cli4 (10Mbit Hub)

|eth1

[server]

|eth0

cli6---(10Mbit Hub)--cli7

As i originally limited the traffic with cbq.init,all the clients had 64 kbps outside the network,but inside too.So like,if i ping the eth1 interface of the [server] it was like 0.5 ms,but if i'd ping the eth0 there were like 3,4 seconds.
Basically i want all the LAN clients to have 100 or 10 Mbits inside,in my [ME] eth1 interface,and limited at 64 Kbits only outside the network.

Quoted 3 lines

I'd appreciate if you'll give me some hints in creating the correct cbq ierarchy to have at least full 10 Mbit inside and for all the clients the 64 Kbit limit outside of [ME].

What if you create 2 classes : one for the internet traffic so limited to 256 kbit and one for the rest so rate = 100 mbit. Redirect all local traffic to the second class and all internet to the first class. You can use the first class as parent to control the internet traffic per client.

root qdisc
LAN class : 100 mbit
Internet class : bounded to 256kbit

      cli1 class
      cli2 class
      cli3 class
      ...

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/