100 Mbit/64 Kbit problem..
Hello.im pretty new in advanced routing and limiting issues. i have read a little and decided to ask you guys before anything else. this is a simple graph of my home network:
cli1 cli2 cli3
| | |
eth0 eth1 | | |
BBone --------- [ME] --------(100Mbit Switch) cli5
256Kbit 100Mbit | \ |
| \ |
cli4 (10Mbit Hub)
|
|eth1
[server]
|eth0
|
cli6---(10Mbit Hub)--cli7As i originally limited the traffic with cbq.init,all the clients had 64 kbps outside the network,but inside too.So like,if i ping the eth1 interface of the [server] it was like 0.5 ms,but if i'd ping the eth0 there were like 3,4 seconds.
Basically i want all the LAN clients to have 100 or 10 Mbits inside,in my [ME] eth1 interface,and limited at 64 Kbits only outside the network.
I'd appreciate if you'll give me some hints in creating the correct cbq ierarchy to have at least full 10 Mbit inside and for all the clients the 64 Kbit limit outside of [ME].
Thanks in advance.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 29 lines · Petre Daniel
Hello.im pretty new in advanced routing and limiting issues. i have read a little and decided to ask you guys before anything else. this is a simple graph of my home network:
cli1 cli2 cli3
eth0 eth1 | | |
BBone --------- [ME] --------(100Mbit Switch) cli5
256Kbit 100Mbit | \ || \ |
cli4 (10Mbit Hub)
|eth1
[server]
|eth0
cli6---(10Mbit Hub)--cli7
As i originally limited the traffic with cbq.init,all the clients had 64 kbps outside the network,but inside too.So like,if i ping the eth1 interface of the [server] it was like 0.5 ms,but if i'd ping the eth0 there were like 3,4 seconds.
Basically i want all the LAN clients to have 100 or 10 Mbits inside,in my [ME] eth1 interface,and limited at 64 Kbits only outside the network.
Quoted 3 lines
I'd appreciate if you'll give me some hints in creating the correct cbq ierarchy to have at least full 10 Mbit inside and for all the clients the 64 Kbit limit outside of [ME].
What if you create 2 classes : one for the internet traffic so limited to 256 kbit and one for the rest so rate = 100 mbit. Redirect all local traffic to the second class and all internet to the first class. You can use the first class as parent to control the internet traffic per client.
root qdisc
LAN class : 100 mbit
Internet class : bounded to 256kbit
cli1 class
cli2 class
cli3 class
...Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/