In what order are CBQ and iptables applied?
Let's say I have two Ethernet interfaces (eth0 and eth1). I am trying to shape multiple TCP connections to 56K from one 100MBit pipe.
CLIENT ---------- ETH0 -------- ETH1 ---------- SERVER
192.168.1.1 192.168.1.254 172.16.1.254 172.16.1.1
For example, I want the client to be able to make multiple TCP connections (.1.1:80, .1.1:8081, .1.1:8082) all at 56K from the server, which obviously has the ability to deliver 100MBit.
My CBQ file looks like so:
DEVICE=eth0,100MBit,10Mbit RATE=56Kbit WEIGHT=5Kbit PRIO=5 RULE=192.168.1.1/24:80 RULE=192.168.1.1/24:8081 RULE=192.168.1.1/24:8082 RULE=192.168.1.1/24:8083 RULE=192.168.1.1/24:8084 RULE=192.168.1.1/24:8085
Is it possible to use iptables to make all the connections' destination ports appear to be port 80? How, and to which interface, should I apply the rules?
Also, when is CBQ applied? Prerouting? Postrouting? Is it applied pre- or post-routing specific to the interface, or to the kernel?
Tom Masse
Engineer, Network Operations
Gómez, Inc.
T 781.768.2134
F 781.466.1434
Maximize Your Internet Channel Effectiveness
http://www.gomez.com/
Quoted 23 lines · Tom
Let's say I have two Ethernet interfaces (eth0 and eth1). I am trying to shape multiple TCP connections to 56K from one 100MBit pipe.
CLIENT ---------- ETH0 -------- ETH1 ---------- SERVER
192.168.1.1 192.168.1.254 172.16.1.254 172.16.1.1For example, I want the client to be able to make multiple TCP connections (.1.1:80, .1.1:8081, .1.1:8082) all at 56K from the server, which obviously has the ability to deliver 100MBit.
My CBQ file looks like so:
DEVICE=eth0,100MBit,10Mbit RATEVKbit WEIGHT=5Kbit PRIO=5 RULE2.168.1.1/24:80 RULE2.168.1.1/24:8081 RULE2.168.1.1/24:8082 RULE2.168.1.1/24:8083 RULE2.168.1.1/24:8084 RULE2.168.1.1/24:8085
Quoted 4 lines
Is it possible to use iptables to make all the connections' destination ports appear to be port 80? How, and to which interface, should I apply the rules?
Tom,
it is not possible to do so, if I understand your question. Take a
look at http://www.netfilter.org/documentation to learn more about iptables.
Quoted 3 lines
Also, when is CBQ applied? Prerouting? Postrouting? Is it applied pre- or post-routing specific to the interface, or to the kernel?
I suggest that you take a look at http://www.docum.org as there is a
good FAQ about traffic control. You'll find a diagram that shows where traffic control applies.
Stephane
Quoted 11 lines
*Tom Masse*
Engineer, Network Operations
Gómez, Inc.T 781.768.2134
F 781.466.1434/Maximize Your Internet Channel Effectiveness/
_http://www.gomez.com/_
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/