Skip to contentSkip to conversation

In what order are CBQ and iptables applied?

LARTC Masse, Tom 2 participants 2 messages Jan 16, 2003

lore
Share & tools
lore

Masse, Tom

author
#0 lore raw

Let's say I have two Ethernet interfaces (eth0 and eth1). I am trying to shape multiple TCP connections to 56K from one 100MBit pipe.

CLIENT ---------- ETH0 -------- ETH1 ---------- SERVER
192.168.1.1 192.168.1.254 172.16.1.254 172.16.1.1

For example, I want the client to be able to make multiple TCP connections (.1.1:80, .1.1:8081, .1.1:8082) all at 56K from the server, which obviously has the ability to deliver 100MBit.

My CBQ file looks like so:

	DEVICE=eth0,100MBit,10Mbit
	RATE=56Kbit
	WEIGHT=5Kbit
	PRIO=5
	RULE=192.168.1.1/24:80
	RULE=192.168.1.1/24:8081
	RULE=192.168.1.1/24:8082
	RULE=192.168.1.1/24:8083
	RULE=192.168.1.1/24:8084
	RULE=192.168.1.1/24:8085

Is it possible to use iptables to make all the connections' destination ports appear to be port 80? How, and to which interface, should I apply the rules?

Also, when is CBQ applied? Prerouting? Postrouting? Is it applied pre- or post-routing specific to the interface, or to the kernel?

Tom Masse
Engineer, Network Operations
Gómez, Inc.

T 781.768.2134
F 781.466.1434

Maximize Your Internet Channel Effectiveness
http://www.gomez.com/

#1 lore raw
Quoted 23 lines · Tom

Let's say I have two Ethernet interfaces (eth0 and eth1). I am trying to shape multiple TCP connections to 56K from one 100MBit pipe.

CLIENT ---------- ETH0 -------- ETH1 ---------- SERVER
192.168.1.1 192.168.1.254 172.16.1.254 172.16.1.1

For example, I want the client to be able to make multiple TCP connections (.1.1:80, .1.1:8081, .1.1:8082) all at 56K from the server, which obviously has the ability to deliver 100MBit.

My CBQ file looks like so:

        DEVICE=eth0,100MBit,10Mbit
        RATEVKbit
        WEIGHT=5Kbit
        PRIO=5
        RULE2.168.1.1/24:80
        RULE2.168.1.1/24:8081
        RULE2.168.1.1/24:8082
        RULE2.168.1.1/24:8083
        RULE2.168.1.1/24:8084
        RULE2.168.1.1/24:8085
Quoted 4 lines

Is it possible to use iptables to make all the connections' destination ports appear to be port 80? How, and to which interface, should I apply the rules?

Tom,

it is not possible to do so, if I understand your question. Take a
look at http://www.netfilter.org/documentation to learn more about iptables.

Quoted 3 lines

Also, when is CBQ applied? Prerouting? Postrouting? Is it applied pre- or post-routing specific to the interface, or to the kernel?

I suggest that you take a look at http://www.docum.org as there is a
good FAQ about traffic control. You'll find a diagram that shows where traffic control applies.

Stephane

Quoted 11 lines

*Tom Masse*
Engineer, Network Operations
Gómez, Inc.

T 781.768.2134
F 781.466.1434

/Maximize Your Internet Channel Effectiveness/
_http://www.gomez.com/_

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/