load balancing without NAT
I have eth0 (isp1, internet), eth1 (isp2, internet) and eth2 for my LAN
eth0 (isp1)
\
Linux - eth2 (LAN)
/eth1 (isp2)
I need for every connection (not packet) load balancing - TCP sessions must be kept. For example: first connection from LAN goes through eth0, second through eth1, third through eth0 ... I can't change anything on the other site of eth0 and eth1.
This explains idea (but is with NAT - I need without):
http://www.linuxvirtualserver.org/~julian/nano.txt
Signature · 9 lines
GPG-Key: http://www.bartek.bicom.pl/public_key.txt pub 1024D/948DE45D 2002-12-12 Bartek Krajnik <[email protected]> Primary key fingerprint: 95E9 8E2D 1801 7864 2244 6EAA 03E5 764D 948D E45D _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 8 lines · Bartek Krajnik
I have eth0 (isp1, internet), eth1 (isp2, internet) and eth2 for my LAN
eth0 (isp1)
\ Linux - eth2 (LAN) /eth1 (isp2)
Quoted 7 lines
I need for every connection (not packet) load balancing - TCP sessions must be kept. For example: first connection from LAN goes through eth0, second through eth1, third through eth0 ... I can't change anything on the other site of eth0 and eth1.
This explains idea (but is with NAT - I need without):
http://www.linuxvirtualserver.org/~julian/nano.txt
As far as I know, you need NAT. So you are out of luck.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/