Skip to contentSkip to conversation

Bandwidth control using Linux or other router

LARTC Ming-Ching Tiew 3 participants 4 messages Feb 12, 2003 – Feb 13, 2003

lore
Share & tools
lore
#0 lore raw

I have a requirement to be connected to a T1/E1
leased line WAN. Because of QoS issues, I am
considering these options :-

1. Purchase a router which has some form of
bandwidth management - this would be
expensive, rite ?

2. Purchase a low end router with 1 lan 1 wan,
and connects a dual LAN linux before it.

Will this additional hop slow down anything?

3. Purchase a supported T1/E1 interface cards
and plug it into the Linux box.

This could be a problem for me because of
support issues. What if it does not properly?
What if there are problems with the card
or the drivers ?

Any recommendation?

__________________________________________________
Do you Yahoo!?
Yahoo! Shopping - Send Flowers for Valentine's Day
http://shopping.yahoo.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

Hello all,

: 1. Purchase a router which has some form of bandwidth management - this
: would be expensive, rite ?

You have to decide what is expensive for you. Time, money, expertise, control, or not having a software/networking vendor to vilify.

: 2. Purchase a low end router with 1 lan 1 wan, and connects a dual LAN
: linux before it. Will this additional hop slow down anything?

Yes. But maybe not significantly enough to be a problem...depends on your pipe and usage on that pipe. Remember, it's ideal to perform traffic control on the bottleneck itself. Regardless, I'd suggest option 3 or option 1, depending on your answer to your own question in 1.

: 3. Purchase a supported T1/E1 interface cards and plug it into the
: Linux box.

I recommend the Sangoma WAN cards. I've been using them for at least 3 years under linux, and they are well supported by Sangoma and the linux community (you'll see the driver in the distribution).

http://www.sangoma.com/

I've had exactly one problem with the wanpipe/wanrouter software, and it had already been identified and fixed by the time I had filed the bug report with Sangoma.

 :    This could be a problem for me because of support issues. What if it
 :    does not properly? What if there are problems with the card or the
 :    drivers ?

You won't have problems with support for Sangoma's cards in the kernel nor technical support from Sangoma.

-Martin

Signature · 5 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected]

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Ming-Ching Tiew

I am surprised because I am quite inclined towards option 2. Haha.

Regarding Sangoma solution, what Linux kernel version they are supported on ? I would need 2.4.20 or there about.

Rgds.
----- Original Message -----
From: "Martin A. Brown" <[email protected]>
To: "Ming-Ching Tiew" <[email protected]>
Cc: <[email protected]>
Sent: Thursday, February 13, 2003 7:59 AM
Subject: Re: [LARTC] Bandwidth control using Linux or other router

Quoted 29 lines

Hello all,

: 1. Purchase a router which has some form of bandwidth management - this
: would be expensive, rite ?

You have to decide what is expensive for you. Time, money, expertise, control, or not having a software/networking vendor to vilify.

: 2. Purchase a low end router with 1 lan 1 wan, and connects a dual LAN
: linux before it. Will this additional hop slow down anything?

Yes. But maybe not significantly enough to be a problem...depends on your pipe and usage on that pipe. Remember, it's ideal to perform traffic control on the bottleneck itself. Regardless, I'd suggest option 3 or option 1, depending on your answer to your own question in 1.

: 3. Purchase a supported T1/E1 interface cards and plug it into the
: Linux box.

I recommend the Sangoma WAN cards. I've been using them for at least 3 years under linux, and they are well supported by Sangoma and the linux community (you'll see the driver in the distribution).

http://www.sangoma.com/

I've had exactly one problem with the wanpipe/wanrouter software, and it had already been identified and fixed by the time I had filed the bug report with Sangoma.

Quoted 7 lines
 :    This could be a problem for me because of support issues. What if it
 :    does not properly? What if there are problems with the card or the
 :    drivers ?

You won't have problems with support for Sangoma's cards in the kernel nor technical support from Sangoma.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#3 lore raw
In reply to Ming-Ching Tiew

Hello there again,

: > I recommend the Sangoma WAN cards. I've been using them for at least 3 : > years under linux, and they are well supported by Sangoma and the linux : > community (you'll see the driver in the distribution).
:
: Regarding Sangoma solution, what Linux kernel version they are : supported on ? I would need 2.4.20 or there about.

Perhaps I wasn't as clear as I could have been. Support for their cards has been a part of the linux kernel distribution for quite some time.

$ find linux-2.4.20/ -type f -name wan\* -print
linux-2.4.20/include/linux/wanrouter.h
linux-2.4.20/include/linux/wanpipe.h
linux-2.4.20/include/linux/modules/wanmain.stamp
linux-2.4.20/include/linux/modules/wanmain.ver
linux-2.4.20/include/config/wan.h
linux-2.4.20/net/wanrouter/wanmain.c
linux-2.4.20/net/wanrouter/wanproc.c
linux-2.4.20/net/wanrouter/wanproc.o
linux-2.4.20/net/wanrouter/wanmain.o
linux-2.4.20/net/wanrouter/wanrouter.o
linux-2.4.20/drivers/net/wan/wanpipe_multppp.c
linux-2.4.20/drivers/net/wan/wan.o
linux-2.4.20/drivers/net/wan/wanpipe_multppp.o
linux-2.4.20/drivers/net/wan/wanpipe.o
linux-2.4.20/Documentation/networking/wan-router.txt
linux-2.4.20/Documentation/networking/wanpipe.txt
linux-2.4.20/Documentation/DocBook/wanbook.tmpl

Tschüs,

-Martin

Signature · 5 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected]

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/