Bandwidth control using Linux or other router
I have a requirement to be connected to a T1/E1
leased line WAN. Because of QoS issues, I am
considering these options :-
1. Purchase a router which has some form of
bandwidth management - this would be
expensive, rite ?
2. Purchase a low end router with 1 lan 1 wan,
and connects a dual LAN linux before it.
Will this additional hop slow down anything?
3. Purchase a supported T1/E1 interface cards
and plug it into the Linux box.
This could be a problem for me because of
support issues. What if it does not properly?
What if there are problems with the card
or the drivers ?
Any recommendation?
__________________________________________________
Do you Yahoo!?
Yahoo! Shopping - Send Flowers for Valentine's Day
http://shopping.yahoo.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hello all,
: 1. Purchase a router which has some form of bandwidth management - this
: would be expensive, rite ?
You have to decide what is expensive for you. Time, money, expertise, control, or not having a software/networking vendor to vilify.
: 2. Purchase a low end router with 1 lan 1 wan, and connects a dual LAN
: linux before it. Will this additional hop slow down anything?
Yes. But maybe not significantly enough to be a problem...depends on your pipe and usage on that pipe. Remember, it's ideal to perform traffic control on the bottleneck itself. Regardless, I'd suggest option 3 or option 1, depending on your answer to your own question in 1.
: 3. Purchase a supported T1/E1 interface cards and plug it into the
: Linux box.
I recommend the Sangoma WAN cards. I've been using them for at least 3 years under linux, and they are well supported by Sangoma and the linux community (you'll see the driver in the distribution).
I've had exactly one problem with the wanpipe/wanrouter software, and it had already been identified and fixed by the time I had filed the bug report with Sangoma.
: This could be a problem for me because of support issues. What if it : does not properly? What if there are problems with the card or the : drivers ?
You won't have problems with support for Sangoma's cards in the kernel nor technical support from Sangoma.
-Martin
Signature · 5 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected] _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
I am surprised because I am quite inclined towards option 2. Haha.
Regarding Sangoma solution, what Linux kernel version they are supported on ? I would need 2.4.20 or there about.
Rgds.
----- Original Message -----
From: "Martin A. Brown" <[email protected]>
To: "Ming-Ching Tiew" <[email protected]>
Cc: <[email protected]>
Sent: Thursday, February 13, 2003 7:59 AM
Subject: Re: [LARTC] Bandwidth control using Linux or other router
Quoted 29 lines
Hello all,
: 1. Purchase a router which has some form of bandwidth management - this
: would be expensive, rite ?You have to decide what is expensive for you. Time, money, expertise, control, or not having a software/networking vendor to vilify.
: 2. Purchase a low end router with 1 lan 1 wan, and connects a dual LAN
: linux before it. Will this additional hop slow down anything?Yes. But maybe not significantly enough to be a problem...depends on your pipe and usage on that pipe. Remember, it's ideal to perform traffic control on the bottleneck itself. Regardless, I'd suggest option 3 or option 1, depending on your answer to your own question in 1.
: 3. Purchase a supported T1/E1 interface cards and plug it into the
: Linux box.I recommend the Sangoma WAN cards. I've been using them for at least 3 years under linux, and they are well supported by Sangoma and the linux community (you'll see the driver in the distribution).
I've had exactly one problem with the wanpipe/wanrouter software, and it had already been identified and fixed by the time I had filed the bug report with Sangoma.
Quoted 7 lines
: This could be a problem for me because of support issues. What if it : does not properly? What if there are problems with the card or the : drivers ?You won't have problems with support for Sangoma's cards in the kernel nor technical support from Sangoma.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hello there again,
: > I recommend the Sangoma WAN cards. I've been using them for at least 3 : > years under linux, and they are well supported by Sangoma and the linux : > community (you'll see the driver in the distribution).
:
: Regarding Sangoma solution, what Linux kernel version they are : supported on ? I would need 2.4.20 or there about.
Perhaps I wasn't as clear as I could have been. Support for their cards has been a part of the linux kernel distribution for quite some time.
$ find linux-2.4.20/ -type f -name wan\* -print linux-2.4.20/include/linux/wanrouter.h linux-2.4.20/include/linux/wanpipe.h linux-2.4.20/include/linux/modules/wanmain.stamp linux-2.4.20/include/linux/modules/wanmain.ver linux-2.4.20/include/config/wan.h linux-2.4.20/net/wanrouter/wanmain.c linux-2.4.20/net/wanrouter/wanproc.c linux-2.4.20/net/wanrouter/wanproc.o linux-2.4.20/net/wanrouter/wanmain.o linux-2.4.20/net/wanrouter/wanrouter.o linux-2.4.20/drivers/net/wan/wanpipe_multppp.c linux-2.4.20/drivers/net/wan/wan.o linux-2.4.20/drivers/net/wan/wanpipe_multppp.o linux-2.4.20/drivers/net/wan/wanpipe.o linux-2.4.20/Documentation/networking/wan-router.txt linux-2.4.20/Documentation/networking/wanpipe.txt linux-2.4.20/Documentation/DocBook/wanbook.tmpl
Tschüs,
-Martin
Signature · 5 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected] _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/