Problems with route by fwmark
Hi,
I have some Problems with Advanced Routing by FWMARK. Here my configuration:
static routes ( route -n ) :
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
...
192.168.1.0 10.111.111.1 255.255.255.0 UG 0 0 0 eth0
...
192.168.7.0 10.111.111.6 255.255.255.0 UG 0 0 0 eth2 192.168.6.0 10.111.111.6 255.255.255.0 UG 0 0 0 eth2 192.168.5.0 10.111.111.6 255.255.255.0 UG 0 0 0 eth2 192.168.4.0 10.111.111.6 255.255.255.0 UG 0 0 0 eth2 192.168.3.0 10.111.111.6 255.255.255.0 UG 0 0 0 eth2 192.168.2.0 10.111.111.6 255.255.255.0 UG 0 0 0 eth2 192.168.12.0 10.111.111.6 255.255.255.0 UG 0 0 0 eth2 192.168.11.0 10.111.111.6 255.255.255.0 UG 0 0 0 eth2 192.168.9.0 10.111.111.6 255.255.255.0 UG 0 0 0 eth2 192.168.8.0 10.111.111.6 255.255.255.0 UG 0 0 0 eth2
...
Our network 192.168.1.0/24 (reachable by eth0) is addressed with 192.168.10.0/24 for all other networks, which are reachable by eth2. It works fine with some SNAT-rules and DNAT-rules. The Big Problem is a second 192.168.1.0-network, which is reachable by eth2. Our network wants to address this network with 192.168.20.0/24.
netfilterscript:
...
# workaround (http://lists.netfilter.org/pipermail/netfilter/2000-November/006089.html)
echo 0 > /proc/sys/net/ipv4/conf/all/rp_filter
echo 1 > /proc/sys/net/ipv4/route/flush
...
# rules to route packtes from 192.168.1.0 to virtual 192.168.20.0 => to second 192.168.1.0
/usr/sbin/iptables -t mangle -A PREROUTING -i eth0 -j MARK --set-mark 17
for ((i=3; i<255; i++)); do
/usr/sbin/iptables -t nat -A PREROUTING -i eth0 -s 192.168.1.0/24 -d 192.168.20.${i} -j DNAT --to-destination 192.168.1.${i}
/usr/sbin/iptables -t nat -A POSTROUTING -s 192.168.1.${i} -o eth2 -j SNAT --to-source 192.168.10.${i}
...
done
...
# in /etc/iproute2/rt_tables: ... 201 m.table ...
ip rule add fwmark 17 table m.table
/sbin/ip route add 192.168.1.0/24 via 10.111.111.6 dev eth2 table m.table
...
EOnetfilterscript
Quoted 1 line
ip rule ls
0: from all lookup local 32765: from all fwmark 17 lookup m.table 32766: from all lookup main 32767: from all lookup default
Quoted 1 line
ip route list table m.table
192.168.1.0/24 via 10.111.111.6 dev eth2
But!!!!
Packets from 192.168.1.0/24 to 192.168.20.0/24 leaves the router by eth0 (with IP-Header:
From 192.168.1.0/24 To 192.168.1.0/24) => DNAT Works. The mangle-rule works too, because I log all Packets marked with 17.
System:
SuSE Linux 8.0 with Kernel SuSE-2.4.18-4GB
Advanced Routing und RouteByFWMARK ist configured:
Quoted 3 lines
cd
/usr/src/linux
make cloneconfig
cat ./.config | grep IP | grep ROUTE
CONFIG_IP_ADVANCED_ROUTER=yCONFIG_IP_ROUTE_FWMARK=yCONFIG_IP_ROUTE_NAT=yCONFIG_IP_ROUTE_MULTIPATH=yCONFIG_IP_ROUTE_TOS=yCONFIG_IP_ROUTE_VERBOSE=yCONFIG_IP_ROUTE_LARGE_TABLES=yCONFIG_IP_MROUTE=y
What's the Problem???
Thanks,
Basti
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/