Skip to contentSkip to conversation

Problems with route by fwmark

LARTC Sebastian Schneider 1 participant 1 message Mar 15, 2003

lore
Share & tools
lore
#0 lore raw

Hi,

I have some Problems with Advanced Routing by FWMARK. Here my configuration:

static routes ( route -n ) :

Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
...
192.168.1.0 10.111.111.1 255.255.255.0 UG 0 0 0 eth0
...

192.168.7.0      10.111.111.6     255.255.255.0   UG    0      0        0 eth2 
192.168.6.0      10.111.111.6     255.255.255.0   UG    0      0        0 eth2 
192.168.5.0      10.111.111.6     255.255.255.0   UG    0      0        0 eth2 
192.168.4.0      10.111.111.6     255.255.255.0   UG    0      0        0 eth2 
192.168.3.0      10.111.111.6     255.255.255.0   UG    0      0        0 eth2 
192.168.2.0      10.111.111.6     255.255.255.0   UG    0      0        0 eth2 
192.168.12.0     10.111.111.6     255.255.255.0   UG    0      0        0 eth2 
192.168.11.0     10.111.111.6     255.255.255.0   UG    0      0        0 eth2 
192.168.9.0      10.111.111.6     255.255.255.0   UG    0      0        0 eth2 
192.168.8.0      10.111.111.6     255.255.255.0   UG    0      0        0 eth2 

...

Our network 192.168.1.0/24 (reachable by eth0) is addressed with 192.168.10.0/24 for all other networks, which are reachable by eth2. It works fine with some SNAT-rules and DNAT-rules. The Big Problem is a second 192.168.1.0-network, which is reachable by eth2. Our network wants to address this network with 192.168.20.0/24.

netfilterscript:
...

# workaround (http://lists.netfilter.org/pipermail/netfilter/2000-November/006089.html)  

echo 0 > /proc/sys/net/ipv4/conf/all/rp_filter
echo 1 > /proc/sys/net/ipv4/route/flush

...

# rules to route packtes from 192.168.1.0 to virtual 192.168.20.0  => to second 192.168.1.0 

/usr/sbin/iptables -t mangle -A PREROUTING -i eth0 -j MARK --set-mark 17

for ((i=3; i<255; i++)); do

	/usr/sbin/iptables -t nat -A PREROUTING  -i eth0 -s 192.168.1.0/24 -d 192.168.20.${i} -j 

DNAT --to-destination 192.168.1.${i}

	/usr/sbin/iptables -t nat -A POSTROUTING -s 192.168.1.${i} -o eth2 -j SNAT --to-source 

192.168.10.${i}

...

done

...

# in /etc/iproute2/rt_tables:  ... 201 m.table ... 

ip rule add fwmark 17 table m.table

/sbin/ip route add 192.168.1.0/24 via 10.111.111.6 dev eth2 table m.table

...
EOnetfilterscript

Quoted 1 line

ip rule ls

0:      from all lookup local  
32765:  from all fwmark       17 lookup m.table  
32766:  from all lookup main  
32767:  from all lookup default 
Quoted 1 line

ip route list table m.table

192.168.1.0/24 via 10.111.111.6 dev eth2

But!!!!

Packets from 192.168.1.0/24 to 192.168.20.0/24 leaves the router by eth0 (with IP-Header:
From 192.168.1.0/24 To 192.168.1.0/24) => DNAT Works. The mangle-rule works too, because I log all Packets marked with 17.

System:

SuSE Linux 8.0 with Kernel SuSE-2.4.18-4GB

Advanced Routing und RouteByFWMARK ist configured:

Quoted 3 lines

cd /usr/src/linux
make cloneconfig
cat ./.config | grep IP | grep ROUTE

CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_NAT=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_TOS=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_LARGE_TABLES=y
CONFIG_IP_MROUTE=y

What's the Problem???

Thanks,
Basti

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/