Skip to contentSkip to conversation

Bridge+QOS

LARTC hare ram 3 participants 3 messages Mar 17, 2003 – Mar 18, 2003

lore
Share & tools
lore

hare ram

author
#0 lore raw

Hi all

iam setting up a bridge with QOS Services

i would like to you to have coments on setup, is this works

i ahve setup like this

LAN--eth1(Bridge)eth0--router--Internet

in LAN i have users 10 people
i would like to have QOS Services for 5 people burstable 5 People commited ( bounded b/w what i have)

Can i use TC+htb to make this setup
is the tc+htb work with my transparent bridge

thanks
hare

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 9 lines · hare ram

Hi all

iam setting up a bridge with QOS Services

i would like to you to have coments on setup, is this works

i ahve setup like this

Quoted 8 lines

LAN--eth1(Bridge)eth0--router--Internet

in LAN i have users 10 people
i would like to have QOS Services for 5 people burstable 5 People commited ( bounded b/w what i have)

Can i use TC+htb to make this setup

yes

Quoted 1 line

is the tc+htb work with my transparent bridge

yes.

You have to shape on eth0 and eth1. Just like you should do on a normal router.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to hare ram

Works very well. Have been using it for 8 months so. Bridging provides transparency on network and does not affect the tc operation in any manner. If you want marking of packets and routing based on fwmark, then you'll have to juggle a bit as the packet flow in a bridge is different from that of a router. Marking is possible only on the FORWARD Chain/table. Alternatively, you can force packets thro' iptables chains
- prerouting, nat, input, forward, postrouting, output using ebtables. I'm not sure if ebtables can mark packets. Have not looked deep enough.

Mohan

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of hare ram
Sent: Monday, March 17, 2003 12:35 PM
To: [email protected]
Subject: [LARTC] Bridge+QOS

Hi all

iam setting up a bridge with QOS Services

i would like to you to have coments on setup, is this works

i ahve setup like this

LAN--eth1(Bridge)eth0--router--Internet

in LAN i have users 10 people
i would like to have QOS Services for 5 people burstable 5 People commited ( bounded b/w what i have)

Can i use TC+htb to make this setup
is the tc+htb work with my transparent bridge

thanks
hare

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/