Skip to contentSkip to conversation

How to setup 2 sdsl with load balance and failover in RH8 ?

LARTC casey wong 3 participants 3 messages Mar 20, 2003 – Mar 21, 2003

lore
Share & tools
lore
#1 lore raw

Re: [LARTC] How to setup 2 sdsl with load balance and failover in

Mmmmmm...sleepy....

Look in the LARTC mailing archive for nexthop and equalize. Also read up on nexthop and equalize:

Search mailing archive:

http://www.google.com/search?q=site%3Amailman.ds9a.nl+equalize+nexthop

Documentation:

http://lartc.org/

Dead gateway detection and other routing patches:

http://www.ssi.bg/~ja/

A patch to the equalize route flag:

http://www.trash.net/~kaber/

Good luck,

-Martin

: Anyone can help me how to config. 2 sdsl with load : balance and failover in RH8 box ?

Signature · 5 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected]

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw

Re: [LARTC] How to setup 2 sdsl with load balance and failover in

In reply to casey wong

Yes look in the archives. Check for post by me or Julian Anastasov.

I used to have two SDSL lines and load balanced them for close to a year. I am willing to help, but please do as much research as you can first. I can help with problems, but I do not hold hands for free.

Read the nano-how-to, apply Julian's patches to a custom kernel. Also understand that the load balancing is done on two levels. Inside out via next hop/equalize. Outside in via DNS.

Signature · 12 lines
Sincerely,
William L. Thomson Jr.
Support Group
Obsidian-Studios, Inc.
3548 Jamestown Ln.
Jacksonville, FL 32223
Phone/Fax  904.260.2445
http://www.obsidian-studios.com

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/