How to setup 2 sdsl with load balance and failover in RH8 ?
Anyone can help me how to config. 2 sdsl with load balance and failover in RH8 box ?
__________________________________________________
Do you Yahoo!?
Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop!
http://platinum.yahoo.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Re: [LARTC] How to setup 2 sdsl with load balance and failover in
Mmmmmm...sleepy....
Look in the LARTC mailing archive for nexthop and equalize. Also read up on nexthop and equalize:
Search mailing archive:
http://www.google.com/search?q=site%3Amailman.ds9a.nl+equalize+nexthop
Documentation:
Dead gateway detection and other routing patches:
A patch to the equalize route flag:
Good luck,
-Martin
: Anyone can help me how to config. 2 sdsl with load : balance and failover in RH8 box ?
Signature · 5 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected] _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Re: [LARTC] How to setup 2 sdsl with load balance and failover in
In reply to casey wongYes look in the archives. Check for post by me or Julian Anastasov.
I used to have two SDSL lines and load balanced them for close to a year. I am willing to help, but please do as much research as you can first. I can help with problems, but I do not hold hands for free.
Read the nano-how-to, apply Julian's patches to a custom kernel. Also understand that the load balancing is done on two levels. Inside out via next hop/equalize. Outside in via DNS.
Signature · 12 lines
Sincerely, William L. Thomson Jr. Support Group Obsidian-Studios, Inc. 3548 Jamestown Ln. Jacksonville, FL 32223 Phone/Fax 904.260.2445 http://www.obsidian-studios.com _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/